WS cleanup: remove SPACE(s) followed by TAB
Signed-off-by: Wolfgang Denk <wd@denx.de>
diff --git a/drivers/cache/cache-v5l2.c b/drivers/cache/cache-v5l2.c
index 2c7983d..bbdb76b 100644
--- a/drivers/cache/cache-v5l2.c
+++ b/drivers/cache/cache-v5l2.c
@@ -68,8 +68,8 @@
struct l2cache *regs;
u32 iprefetch;
u32 dprefetch;
- u32 tram_ctl[2];
- u32 dram_ctl[2];
+ u32 tram_ctl[2];
+ u32 dram_ctl[2];
};
static int v5l2_enable(struct udevice *dev)
diff --git a/drivers/cache/sandbox_cache.c b/drivers/cache/sandbox_cache.c
index 0fb767e..955dfc8 100644
--- a/drivers/cache/sandbox_cache.c
+++ b/drivers/cache/sandbox_cache.c
@@ -31,7 +31,7 @@
static const struct cache_ops sandbox_cache_ops = {
.get_info = sandbox_get_info,
- .enable = sandbox_enable,
+ .enable = sandbox_enable,
.disable = snadbox_disable,
};
diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
index b5cbf80..077757e 100644
--- a/drivers/clk/imx/clk-pllv3.c
+++ b/drivers/clk/imx/clk-pllv3.c
@@ -160,7 +160,7 @@
}
static const struct clk_ops clk_pllv3_sys_ops = {
- .enable = clk_pllv3_generic_enable,
+ .enable = clk_pllv3_generic_enable,
.disable = clk_pllv3_generic_disable,
.get_rate = clk_pllv3_sys_get_rate,
.set_rate = clk_pllv3_sys_set_rate,
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index 4a12b56..e8bae43 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (c) 2013 Samsung Electronics Co., Ltd.
-# http://www.samsung.com
+# http://www.samsung.com
obj-$(CONFIG_EXYNOS_ACE_SHA) += ace_sha.o
obj-y += rsa_mod_exp/
diff --git a/drivers/ddr/fsl/ddr3_dimm_params.c b/drivers/ddr/fsl/ddr3_dimm_params.c
index 8464438..1f8db90 100644
--- a/drivers/ddr/fsl/ddr3_dimm_params.c
+++ b/drivers/ddr/fsl/ddr3_dimm_params.c
@@ -36,18 +36,18 @@
* 0110 16Gb 2GB
*
* SPD byte8 - module memory bus width
- * bit[2:0] primary bus width
+ * bit[2:0] primary bus width
* 000 8bits
- * 001 16bits
- * 010 32bits
- * 011 64bits
+ * 001 16bits
+ * 010 32bits
+ * 011 64bits
*
* SPD byte7 - module organiztion
- * bit[2:0] sdram device width
- * 000 4bits
- * 001 8bits
- * 010 16bits
- * 011 32bits
+ * bit[2:0] sdram device width
+ * 000 4bits
+ * 001 8bits
+ * 010 16bits
+ * 011 32bits
*
*/
static unsigned long long
diff --git a/drivers/ddr/marvell/axp/ddr3_spd.c b/drivers/ddr/marvell/axp/ddr3_spd.c
index e2305d8..dd772e6 100644
--- a/drivers/ddr/marvell/axp/ddr3_spd.c
+++ b/drivers/ddr/marvell/axp/ddr3_spd.c
@@ -46,7 +46,7 @@
#define SPD_COL_NUM_MASK (7 << SPD_COL_NUM_OFF)
#define SPD_MODULE_ORG_BYTE 7
-#define SPD_MODULE_SDRAM_DEV_WIDTH_OFF 0
+#define SPD_MODULE_SDRAM_DEV_WIDTH_OFF 0
#define SPD_MODULE_SDRAM_DEV_WIDTH_MASK (7 << SPD_MODULE_SDRAM_DEV_WIDTH_OFF)
#define SPD_MODULE_BANK_NUM_MIN 1
#define SPD_MODULE_BANK_NUM_OFF 3
diff --git a/drivers/firmware/scmi/Makefile b/drivers/firmware/scmi/Makefile
index e1e0224..966475e 100644
--- a/drivers/firmware/scmi/Makefile
+++ b/drivers/firmware/scmi/Makefile
@@ -1,5 +1,5 @@
obj-y += scmi_agent-uclass.o
obj-y += smt.o
-obj-$(CONFIG_ARM_SMCCC) += smccc_agent.o
+obj-$(CONFIG_ARM_SMCCC) += smccc_agent.o
obj-$(CONFIG_DM_MAILBOX) += mailbox_agent.o
obj-$(CONFIG_SANDBOX) += sandbox-scmi_agent.o sandbox-scmi_devices.o
diff --git a/drivers/i2c/designware_i2c.h b/drivers/i2c/designware_i2c.h
index 9b2349a..b56d7dd 100644
--- a/drivers/i2c/designware_i2c.h
+++ b/drivers/i2c/designware_i2c.h
@@ -112,7 +112,7 @@
#define IC_TX_EMPTY 0x0010
#define IC_TX_OVER 0x0008
#define IC_RX_FULL 0x0004
-#define IC_RX_OVER 0x0002
+#define IC_RX_OVER 0x0002
#define IC_RX_UNDER 0x0001
/* fifo threshold register definitions */
diff --git a/drivers/misc/atsha204a-i2c.c b/drivers/misc/atsha204a-i2c.c
index 52d9ead..715dabb 100644
--- a/drivers/misc/atsha204a-i2c.c
+++ b/drivers/misc/atsha204a-i2c.c
@@ -2,8 +2,8 @@
* I2C Driver for Atmel ATSHA204 over I2C
*
* Copyright (C) 2014 Josh Datko, Cryptotronix, jbd@cryptotronix.com
- * 2016 Tomas Hlavacek, CZ.NIC, tmshlvck@gmail.com
- * 2017 Marek Behun, CZ.NIC, marek.behun@nic.cz
+ * 2016 Tomas Hlavacek, CZ.NIC, tmshlvck@gmail.com
+ * 2017 Marek Behun, CZ.NIC, marek.behun@nic.cz
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as
@@ -40,11 +40,11 @@
*
* int i, j;
* for (i = 0; i < 256; ++i) {
- * u8 c = 0;
- * for (j = 0; j < 8; ++j) {
- * c = (c << 1) | ((i >> j) & 1);
- * }
- * bitreverse_table[i] = c;
+ * u8 c = 0;
+ * for (j = 0; j < 8; ++j) {
+ * c = (c << 1) | ((i >> j) & 1);
+ * }
+ * bitreverse_table[i] = c;
* }
*/
@@ -88,14 +88,14 @@
*
* int i, j;
* for (i = 0; i < 256; ++i) {
- * u16 c = i << 8;
- * for (j = 0; j < 8; ++j) {
- * int b = c >> 15;
- * c <<= 1;
- * if (b)
- * c ^= 0x8005;
- * }
- * crc16_table[i] = c;
+ * u16 c = i << 8;
+ * for (j = 0; j < 8; ++j) {
+ * int b = c >> 15;
+ * c <<= 1;
+ * if (b)
+ * c ^= 0x8005;
+ * }
+ * crc16_table[i] = c;
* }
*/
static u16 const crc16_table[256] = {
diff --git a/drivers/misc/cros_ec.c b/drivers/misc/cros_ec.c
index 1bbc0f9..c627c1d 100644
--- a/drivers/misc/cros_ec.c
+++ b/drivers/misc/cros_ec.c
@@ -414,7 +414,7 @@
int cros_ec_scan_keyboard(struct udevice *dev, struct mbkp_keyscan *scan)
{
- if (ec_command(dev, EC_CMD_MKBP_STATE, 0, NULL, 0, scan,
+ if (ec_command(dev, EC_CMD_MKBP_STATE, 0, NULL, 0, scan,
sizeof(scan->data)) != sizeof(scan->data))
return -1;
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index dde6cd5..7e819d2 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -65,7 +65,7 @@
obj-$(CONFIG_MMC_SDHCI_ROCKCHIP) += rockchip_sdhci.o
obj-$(CONFIG_MMC_SDHCI_S5P) += s5p_sdhci.o
obj-$(CONFIG_MMC_SDHCI_SPEAR) += spear_sdhci.o
-obj-$(CONFIG_MMC_SDHCI_STI) += sti_sdhci.o
+obj-$(CONFIG_MMC_SDHCI_STI) += sti_sdhci.o
obj-$(CONFIG_MMC_SDHCI_TANGIER) += tangier_sdhci.o
obj-$(CONFIG_MMC_SDHCI_TEGRA) += tegra_mmc.o
obj-$(CONFIG_MMC_SDHCI_XENON) += xenon_sdhci.o
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index d3babbf..ba54b19 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -699,7 +699,7 @@
mmc_go_idle(mmc);
start = get_timer(0);
- /* Asking to the card its capabilities */
+ /* Asking to the card its capabilities */
for (i = 0; ; i++) {
err = mmc_send_op_cond_iter(mmc, i != 0);
if (err)
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index d0351b2..9496903 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -799,8 +799,8 @@
* device name
* @name: MTD device name to open
*
- * This function returns MTD device description structure in case of
- * success and an error code in case of failure.
+ * This function returns MTD device description structure in case of
+ * success and an error code in case of failure.
*/
struct mtd_info *get_mtd_device_nm(const char *name)
{
diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index ef8e85a..e486056 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -39,7 +39,7 @@
#define NAND_TIMEOUT 10240
#define NAND_ECC_BUSY 0xC
#define NAND_4BITECC_MASK 0x03FF03FF
-#define EMIF_NANDFSR_ECC_STATE_MASK 0x00000F00
+#define EMIF_NANDFSR_ECC_STATE_MASK 0x00000F00
#define ECC_STATE_NO_ERR 0x0
#define ECC_STATE_TOO_MANY_ERRS 0x1
#define ECC_STATE_ERR_CORR_COMP_P 0x2
diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c
index 0c1bd7b..ddfd75d 100644
--- a/drivers/mtd/nand/raw/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c
@@ -716,7 +716,7 @@
nand->bbt_td = &bbt_main_descr;
nand->bbt_md = &bbt_mirror_descr;
- /* set up nand options */
+ /* set up nand options */
nand->options = NAND_NO_SUBPAGE_WRITE;
nand->bbt_options = NAND_BBT_USE_FLASH;
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 0c26e1d..b533683 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -263,7 +263,7 @@
static void ioread16_rep(void *addr, void *buf, int len)
{
int i;
- u16 *p = (u16 *) buf;
+ u16 *p = (u16 *) buf;
for (i = 0; i < len; i++)
p[i] = readw(addr);
@@ -905,11 +905,11 @@
if (ret)
return ret;
- u32 timer = (CONFIG_SYS_HZ * timeo) / 1000;
- u32 time_start;
+ u32 timer = (CONFIG_SYS_HZ * timeo) / 1000;
+ u32 time_start;
- time_start = get_timer(0);
- while (get_timer(time_start) < timer) {
+ time_start = get_timer(0);
+ while (get_timer(time_start) < timer) {
if (chip->dev_ready) {
if (chip->dev_ready(mtd))
break;
diff --git a/drivers/mtd/nand/raw/nand_ids.c b/drivers/mtd/nand/raw/nand_ids.c
index 3104f87..2a50f0b 100644
--- a/drivers/mtd/nand/raw/nand_ids.c
+++ b/drivers/mtd/nand/raw/nand_ids.c
@@ -30,7 +30,7 @@
LEGACY_ID_NAND("NAND 1MiB 3,3V 8-bit", 0xe8, 1, SZ_4K, SP_OPTIONS),
LEGACY_ID_NAND("NAND 1MiB 3,3V 8-bit", 0xec, 1, SZ_4K, SP_OPTIONS),
LEGACY_ID_NAND("NAND 2MiB 3,3V 8-bit", 0xea, 2, SZ_4K, SP_OPTIONS),
- LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xd5, 4, SZ_8K, SP_OPTIONS),
+ LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xd5, 4, SZ_8K, SP_OPTIONS),
LEGACY_ID_NAND("NAND 8MiB 3,3V 8-bit", 0xe6, 8, SZ_8K, SP_OPTIONS),
#endif
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 09daa0d..46aeef2 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -2306,8 +2306,8 @@
/**
* flexonenand_get_size - Fill up fields in onenand_chip and mtd_info
- * boundary[], diesize[], mtd->size, mtd->erasesize,
- * mtd->eraseregions
+ * boundary[], diesize[], mtd->size, mtd->erasesize,
+ * mtd->eraseregions
* @param mtd - MTD device structure
*/
static void flexonenand_get_size(struct mtd_info *mtd)
diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
index 4aef1dd..0bff52d 100644
--- a/drivers/mtd/spi/spi-nor-ids.c
+++ b/drivers/mtd/spi/spi-nor-ids.c
@@ -76,7 +76,7 @@
{ INFO("at45db321d", 0x1f2700, 0, 64 * 1024, 64, SECT_4K) },
{ INFO("at45db641d", 0x1f2800, 0, 64 * 1024, 128, SECT_4K) },
{ INFO("at25sl321", 0x1f4216, 0, 64 * 1024, 64, SECT_4K) },
- { INFO("at26df081a", 0x1f4501, 0, 64 * 1024, 16, SECT_4K) },
+ { INFO("at26df081a", 0x1f4501, 0, 64 * 1024, 16, SECT_4K) },
#endif
#ifdef CONFIG_SPI_FLASH_EON /* EON */
/* EON -- en25xxx */
diff --git a/drivers/mtd/ubi/crc32.c b/drivers/mtd/ubi/crc32.c
index 9ce061c..35820c7 100644
--- a/drivers/mtd/ubi/crc32.c
+++ b/drivers/mtd/ubi/crc32.c
@@ -293,8 +293,8 @@
*
* A big-endian CRC written this way would be coded like:
* for (i = 0; i < input_bits; i++) {
- * multiple = remainder & 0x80000000 ? CRCPOLY : 0;
- * remainder = (remainder << 1 | next_input_bit()) ^ multiple;
+ * multiple = remainder & 0x80000000 ? CRCPOLY : 0;
+ * remainder = (remainder << 1 | next_input_bit()) ^ multiple;
* }
* Notice how, to get at bit 32 of the shifted remainder, we look
* at bit 31 of the remainder *before* shifting it.
@@ -313,14 +313,14 @@
* This changes the code to:
* for (i = 0; i < input_bits; i++) {
* remainder ^= next_input_bit() << 31;
- * multiple = (remainder & 0x80000000) ? CRCPOLY : 0;
- * remainder = (remainder << 1) ^ multiple;
+ * multiple = (remainder & 0x80000000) ? CRCPOLY : 0;
+ * remainder = (remainder << 1) ^ multiple;
* }
* With this optimization, the little-endian code is simpler:
* for (i = 0; i < input_bits; i++) {
* remainder ^= next_input_bit();
- * multiple = (remainder & 1) ? CRCPOLY : 0;
- * remainder = (remainder >> 1) ^ multiple;
+ * multiple = (remainder & 1) ? CRCPOLY : 0;
+ * remainder = (remainder >> 1) ^ multiple;
* }
*
* Note that the other details of endianness have been hidden in CRCPOLY
@@ -330,19 +330,19 @@
* order, we can actually do the merging 8 or more bits at a time rather
* than one bit at a time:
* for (i = 0; i < input_bytes; i++) {
- * remainder ^= next_input_byte() << 24;
- * for (j = 0; j < 8; j++) {
- * multiple = (remainder & 0x80000000) ? CRCPOLY : 0;
- * remainder = (remainder << 1) ^ multiple;
- * }
+ * remainder ^= next_input_byte() << 24;
+ * for (j = 0; j < 8; j++) {
+ * multiple = (remainder & 0x80000000) ? CRCPOLY : 0;
+ * remainder = (remainder << 1) ^ multiple;
+ * }
* }
* Or in little-endian:
* for (i = 0; i < input_bytes; i++) {
- * remainder ^= next_input_byte();
- * for (j = 0; j < 8; j++) {
- * multiple = (remainder & 1) ? CRCPOLY : 0;
- * remainder = (remainder << 1) ^ multiple;
- * }
+ * remainder ^= next_input_byte();
+ * for (j = 0; j < 8; j++) {
+ * multiple = (remainder & 1) ? CRCPOLY : 0;
+ * remainder = (remainder << 1) ^ multiple;
+ * }
* }
* If the input is a multiple of 32 bits, you can even XOR in a 32-bit
* word at a time and increase the inner loop count to 32.
diff --git a/drivers/net/calxedaxgmac.c b/drivers/net/calxedaxgmac.c
index b98d709..eb1e2a7 100644
--- a/drivers/net/calxedaxgmac.c
+++ b/drivers/net/calxedaxgmac.c
@@ -587,7 +587,7 @@
.start = xgmac_eth_start,
.send = xgmac_tx,
.recv = xgmac_rx,
- .free_pkt = xgmac_free_pkt,
+ .free_pkt = xgmac_free_pkt,
.stop = xgmac_eth_stop,
.write_hwaddr = xgmac_eth_write_hwaddr,
.read_rom_hwaddr = xgmac_eth_read_rom_hwaddr,
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index e46a269..4f062e9 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -28,7 +28,7 @@
--------------------------------------
12/15/2003 Initial port to u-boot by
- Sascha Hauer <saschahauer@web.de>
+ Sascha Hauer <saschahauer@web.de>
06/03/2008 Remy Bohmer <linux@bohmer.net>
- Fixed the driver to work with DM9000A.
@@ -66,7 +66,7 @@
#define DM9000_DBG(fmt,args...) printf(fmt, ##args)
#define DM9000_DMP_PACKET(func,packet,length) \
do { \
- int i; \
+ int i; \
printf("%s: length: %d\n", func, length); \
for (i = 0; i < length; i++) { \
if (i % 8 == 0) \
diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h
index 082154a..f96f12c 100644
--- a/drivers/net/e1000.h
+++ b/drivers/net/e1000.h
@@ -249,7 +249,7 @@
#define E1000_ERR_MASTER_REQUESTS_PENDING 10
#define E1000_ERR_HOST_INTERFACE_COMMAND 11
#define E1000_BLK_PHY_RESET 12
-#define E1000_ERR_SWFW_SYNC 13
+#define E1000_ERR_SWFW_SYNC 13
/* PCI Device IDs */
#define E1000_DEV_ID_82542 0x1000
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index 0a27f3c..59018f0 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -13,9 +13,9 @@
/* Below are the register offsets and bit definitions
* of the Lan911x memory space
*/
-#define RX_DATA_FIFO 0x00
+#define RX_DATA_FIFO 0x00
-#define TX_DATA_FIFO 0x20
+#define TX_DATA_FIFO 0x20
#define TX_CMD_A_INT_ON_COMP 0x80000000
#define TX_CMD_A_INT_BUF_END_ALGN 0x03000000
#define TX_CMD_A_INT_4_BYTE_ALGN 0x00000000
diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
index d7553fe..a6eb82b 100644
--- a/drivers/net/sun8i_emac.c
+++ b/drivers/net/sun8i_emac.c
@@ -403,7 +403,7 @@
}
#define cache_clean_descriptor(desc) \
- flush_dcache_range((uintptr_t)(desc), \
+ flush_dcache_range((uintptr_t)(desc), \
(uintptr_t)(desc) + sizeof(struct emac_dma_desc))
#define cache_inv_descriptor(desc) \
diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index fc3327e..c544af2 100644
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -885,7 +885,7 @@
setbits_be32(addr, _DEVDISR_PCIE4); /* disable */
#endif
- return busno;
+ return busno;
}
#else
int fsl_pcie_init_ctrl(int busno, u32 devdisr, enum srds_prtcl dev,
diff --git a/drivers/pinctrl/meson/pinctrl-meson-axg.c b/drivers/pinctrl/meson/pinctrl-meson-axg.c
index 5d234bc..820a6c9 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-axg.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-axg.c
@@ -908,7 +908,7 @@
};
static struct meson_pmx_bank meson_axg_periphs_pmx_banks[] = {
- /* name first last reg offset */
+ /* name first last reg offset */
BANK_PMX("Z", PIN(GPIOZ_0, EE_OFF), PIN(GPIOZ_10, EE_OFF), 0x2, 0),
BANK_PMX("BOOT", PIN(BOOT_0, EE_OFF), PIN(BOOT_14, EE_OFF), 0x0, 0),
BANK_PMX("A", PIN(GPIOA_0, EE_OFF), PIN(GPIOA_20, EE_OFF), 0xb, 0),
diff --git a/drivers/pinctrl/meson/pinctrl-meson-g12a.c b/drivers/pinctrl/meson/pinctrl-meson-g12a.c
index 8bd265a..90a4f80 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-g12a.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-g12a.c
@@ -1220,7 +1220,7 @@
};
static struct meson_pmx_bank meson_g12a_periphs_pmx_banks[] = {
- /* name first last reg offset */
+ /* name first last reg offset */
BANK_PMX("Z", PIN(GPIOZ_0, EE_OFF), PIN(GPIOZ_15, EE_OFF), 0x6, 0),
BANK_PMX("H", PIN(GPIOH_0, EE_OFF), PIN(GPIOH_8, EE_OFF), 0xb, 0),
BANK_PMX("BOOT", PIN(BOOT_0, EE_OFF), PIN(BOOT_15, EE_OFF), 0x0, 0),
diff --git a/drivers/pinctrl/renesas/pfc-r8a77970.c b/drivers/pinctrl/renesas/pfc-r8a77970.c
index 4e6f406..8cf133a 100644
--- a/drivers/pinctrl/renesas/pfc-r8a77970.c
+++ b/drivers/pinctrl/renesas/pfc-r8a77970.c
@@ -161,7 +161,7 @@
#define IP0_31_28 FM(DU_DG3) FM(MSIOF3_SS2) F_(0, 0) FM(A7) FM(PWMFSW0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP1_3_0 FM(DU_DG4) F_(0, 0) F_(0, 0) FM(A8) FM(FSO_CFE_0_N_A) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP1_7_4 FM(DU_DG5) F_(0, 0) F_(0, 0) FM(A9) FM(FSO_CFE_1_N_A) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1_11_8 FM(DU_DG6) F_(0, 0) F_(0, 0) FM(A10) FM(FSO_TOE_N_A) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1_11_8 FM(DU_DG6) F_(0, 0) F_(0, 0) FM(A10) FM(FSO_TOE_N_A) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP1_15_12 FM(DU_DG7) F_(0, 0) F_(0, 0) FM(A11) FM(IRQ1) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP1_19_16 FM(DU_DB2) F_(0, 0) F_(0, 0) FM(A12) FM(IRQ2) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP1_23_20 FM(DU_DB3) F_(0, 0) F_(0, 0) FM(A13) FM(FXR_CLKOUT1) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
diff --git a/drivers/pinctrl/renesas/pfc-r8a77980.c b/drivers/pinctrl/renesas/pfc-r8a77980.c
index 2d15500..7cd4ef98 100644
--- a/drivers/pinctrl/renesas/pfc-r8a77980.c
+++ b/drivers/pinctrl/renesas/pfc-r8a77980.c
@@ -88,7 +88,7 @@
#define GPSR1_0 F_(IRQ0, IP2_27_24)
/* GPSR2 */
-#define GPSR2_29 F_(FSO_TOE_N, IP10_19_16)
+#define GPSR2_29 F_(FSO_TOE_N, IP10_19_16)
#define GPSR2_28 F_(FSO_CFE_1_N, IP10_15_12)
#define GPSR2_27 F_(FSO_CFE_0_N, IP10_11_8)
#define GPSR2_26 F_(SDA3, IP10_7_4)
@@ -253,11 +253,11 @@
#define IP8_11_8 FM(CANFD0_RX_A) FM(RXDA_EXTFXR) FM(PWM1_B) FM(DU_CDE) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP8_15_12 FM(CANFD1_TX) FM(FXR_TXDB) FM(PWM2_B) FM(TCLK1_B) FM(TX1_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP8_19_16 FM(CANFD1_RX) FM(RXDB_EXTFXR) FM(PWM3_B) FM(TCLK2_B) FM(RX1_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP8_23_20 FM(CANFD_CLK_A) FM(CLK_EXTFXR) FM(PWM4_B) FM(SPEEDIN_B) FM(SCIF_CLK_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP8_23_20 FM(CANFD_CLK_A) FM(CLK_EXTFXR) FM(PWM4_B) FM(SPEEDIN_B) FM(SCIF_CLK_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP8_27_24 FM(DIGRF_CLKIN) FM(DIGRF_CLKEN_IN) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP8_31_28 FM(DIGRF_CLKOUT) FM(DIGRF_CLKEN_OUT) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP9_3_0 FM(IRQ4) F_(0, 0) F_(0, 0) FM(VI0_DATA12) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP9_7_4 FM(IRQ5) F_(0, 0) F_(0, 0) FM(VI0_DATA13) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP9_7_4 FM(IRQ5) F_(0, 0) F_(0, 0) FM(VI0_DATA13) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP9_11_8 FM(MSIOF0_RXD) FM(DU_DR0) F_(0, 0) FM(VI0_DATA14) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP9_15_12 FM(MSIOF0_TXD) FM(DU_DR1) F_(0, 0) FM(VI0_DATA15) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP9_19_16 FM(MSIOF0_SCK) FM(DU_DG0) F_(0, 0) FM(VI0_DATA16) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
diff --git a/drivers/power/pmic/pmic_tps65910.c b/drivers/power/pmic/pmic_tps65910.c
index fcd0a65..e3de730 100644
--- a/drivers/power/pmic/pmic_tps65910.c
+++ b/drivers/power/pmic/pmic_tps65910.c
@@ -51,7 +51,7 @@
/*
* tps65910_set_i2c_control() - Set the TPS65910 to be controlled via the I2C
- * interface.
+ * interface.
* @return: 0 on success, not 0 on failure
*/
int tps65910_set_i2c_control(void)
diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index 03eeacc..2311910 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -401,7 +401,7 @@
.set_invert = meson_pwm_set_invert,
};
-#define XTAL -1
+#define XTAL -1
/* Local clock ids aliases to avoid define conflicts */
#define GXBB_CLKID_HDMI_PLL 2
diff --git a/drivers/ram/k3-ddrss/k3-ddrss.c b/drivers/ram/k3-ddrss/k3-ddrss.c
index cb8edcb..95b5cf9 100644
--- a/drivers/ram/k3-ddrss/k3-ddrss.c
+++ b/drivers/ram/k3-ddrss/k3-ddrss.c
@@ -27,8 +27,8 @@
#define CTRLMMR_DDR4_FSP_CLKCHNG_REQ_OFFS 0x80
#define CTRLMMR_DDR4_FSP_CLKCHNG_ACK_OFFS 0xc0
-#define DDRSS_V2A_R1_MAT_REG 0x0020
-#define DDRSS_ECC_CTRL_REG 0x0120
+#define DDRSS_V2A_R1_MAT_REG 0x0020
+#define DDRSS_ECC_CTRL_REG 0x0120
struct k3_ddrss_desc {
struct udevice *dev;
diff --git a/drivers/spi/atcspi200_spi.c b/drivers/spi/atcspi200_spi.c
index 775b9ff..de9c148 100644
--- a/drivers/spi/atcspi200_spi.c
+++ b/drivers/spi/atcspi200_spi.c
@@ -81,7 +81,7 @@
unsigned int freq;
ulong clock;
unsigned int mode;
- u8 num_cs;
+ u8 num_cs;
unsigned int mtiming;
size_t cmd_len;
u8 cmd_buf[16];
diff --git a/drivers/thermal/imx_tmu.c b/drivers/thermal/imx_tmu.c
index 07766ba..ca45abb 100644
--- a/drivers/thermal/imx_tmu.c
+++ b/drivers/thermal/imx_tmu.c
@@ -22,8 +22,8 @@
DECLARE_GLOBAL_DATA_PTR;
#define SITES_MAX 16
-#define FLAGS_VER2 0x1
-#define FLAGS_VER3 0x2
+#define FLAGS_VER2 0x1
+#define FLAGS_VER3 0x2
#define TMR_DISABLE 0x0
#define TMR_ME 0x80000000
diff --git a/drivers/timer/atmel_pit_timer.c b/drivers/timer/atmel_pit_timer.c
index 3178e58..5cf46f2 100644
--- a/drivers/timer/atmel_pit_timer.c
+++ b/drivers/timer/atmel_pit_timer.c
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2017 Microchip Corporation
- * Wenyou.Yang <wenyou.yang@microchip.com>
+ * Wenyou.Yang <wenyou.yang@microchip.com>
*/
#include <common.h>
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 44533fd..1502cb8 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -691,8 +691,8 @@
* @has_lpm_erratum: true when core was configured with LPM Erratum. Note that
* there's now way for software to detect this in runtime.
* @is_utmi_l1_suspend: the core asserts output signal
- * 0 - utmi_sleep_n
- * 1 - utmi_l1_suspend_n
+ * 0 - utmi_sleep_n
+ * 1 - utmi_l1_suspend_n
* @is_selfpowered: true when we are selfpowered
* @is_fpga: true when we are using the FPGA board
* @needs_fifo_resize: not all users might want fifo resizing, flag it
@@ -713,10 +713,10 @@
* @dis_u2_susphy_quirk: set if we disable usb2 suspend phy
* @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
* @tx_de_emphasis: Tx de-emphasis value
- * 0 - -6dB de-emphasis
- * 1 - -3.5dB de-emphasis
- * 2 - No de-emphasis
- * 3 - Reserved
+ * 0 - -6dB de-emphasis
+ * 1 - -3.5dB de-emphasis
+ * 2 - No de-emphasis
+ * 3 - Reserved
* @index: index of _this_ controller
* @list: to maintain the list of dwc3 controllers
*/
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 4e68fb0..eb416b8 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2209,7 +2209,7 @@
* BESL value in the LPM token is less than or equal to LPM
* NYET threshold.
*/
- if (dwc->revision < DWC3_REVISION_240A && dwc->has_lpm_erratum)
+ if (dwc->revision < DWC3_REVISION_240A && dwc->has_lpm_erratum)
WARN(true, "LPM Erratum not available on dwc3 revisisions < 2.40a\n");
if (dwc->has_lpm_erratum && dwc->revision >= DWC3_REVISION_240A)
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index 96a521e..e18de0e 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -35,7 +35,7 @@
#define AT91_UDP_ISR 0x1c /* Interrupt Status Register */
#define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */
-#define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */
+#define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */
#define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */
#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status [AT91RM9200 only] */
#define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index ba362b8..583ceb4 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -472,7 +472,7 @@
* so using '|=' isn't safe as it may ack an interrupt.
*/
#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */
-#define UDCCR_MASK_BITS (UDCCR_OEN | UDCCR_UDE)
+#define UDCCR_MASK_BITS (UDCCR_OEN | UDCCR_UDE)
static inline void udc_set_mask_UDCCR(int mask)
{
diff --git a/drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h b/drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h
index f0f48a3..8db88f0 100644
--- a/drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h
+++ b/drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h
@@ -40,7 +40,7 @@
*
* To generate the content of the array below, use ie. the following command:
* $ hexdump -v -e '/4 "0x%08x, "' r8a779x_usb3_v3.dlmem | \
- * sed "s@\(.\{47\}\) @\1\n@g"
+ * sed "s@\(.\{47\}\) @\1\n@g"
*
* [1] git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git
*/
diff --git a/drivers/usb/musb-new/musb_gadget.c b/drivers/usb/musb-new/musb_gadget.c
index 5b149da..1fef00b 100644
--- a/drivers/usb/musb-new/musb_gadget.c
+++ b/drivers/usb/musb-new/musb_gadget.c
@@ -995,8 +995,8 @@
&& (musb_ep->dma->actual_len
== musb_ep->packet_sz)) {
/* In double buffer case, continue to unload fifo if
- * there is Rx packet in FIFO.
- **/
+ * there is Rx packet in FIFO.
+ **/
csr = musb_readw(epio, MUSB_RXCSR);
if ((csr & MUSB_RXCSR_RXPKTRDY) &&
hw_ep->rx_double_buffered)
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index e5d8ac7..47b839c 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -207,14 +207,14 @@
/* TxType/RxType */
#define MUSB_TYPE_SPEED 0xc0
#define MUSB_TYPE_SPEED_SHIFT 6
-#define MUSB_TYPE_SPEED_HIGH 1
-#define MUSB_TYPE_SPEED_FULL 2
+#define MUSB_TYPE_SPEED_HIGH 1
+#define MUSB_TYPE_SPEED_FULL 2
#define MUSB_TYPE_SPEED_LOW 3
#define MUSB_TYPE_PROTO 0x30 /* Implicitly zero for ep0 */
#define MUSB_TYPE_PROTO_SHIFT 4
#define MUSB_TYPE_REMOTE_END 0xf /* Implicitly zero for ep0 */
-#define MUSB_TYPE_PROTO_BULK 2
-#define MUSB_TYPE_PROTO_INTR 3
+#define MUSB_TYPE_PROTO_BULK 2
+#define MUSB_TYPE_PROTO_INTR 3
/* CONFIGDATA */
#define MUSB_CONFIGDATA_MPRXE 0x80 /* Auto bulk pkt combining */
@@ -304,7 +304,7 @@
* values are not supported
*/
struct musb_epinfo {
- u8 epnum; /* endpoint number */
+ u8 epnum; /* endpoint number */
u8 epdir; /* endpoint direction */
u16 epsize; /* endpoint FIFO size */
};
diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index ffed3b8..1790170 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -14,7 +14,7 @@
#include "musb_hcd.h"
/* MSC control transfers */
-#define USB_MSC_BBB_RESET 0xFF
+#define USB_MSC_BBB_RESET 0xFF
#define USB_MSC_BBB_GET_MAX_LUN 0xFE
/* Endpoint configuration information */
diff --git a/drivers/video/bus_vcxk.c b/drivers/video/bus_vcxk.c
index 2a72d23..3863662 100644
--- a/drivers/video/bus_vcxk.c
+++ b/drivers/video/bus_vcxk.c
@@ -63,8 +63,8 @@
#ifndef CONFIG_SYS_VCXK_DOUBLEBUFFERED
#define VCXK_BWS(x, data) vcxk_bws[x] = data;
- #define VCXK_BWS_WORD_SET(x, mask) vcxk_bws_word[x] |= mask;
- #define VCXK_BWS_WORD_CLEAR(x, mask) vcxk_bws_word[x] &= ~mask;
+ #define VCXK_BWS_WORD_SET(x, mask) vcxk_bws_word[x] |= mask;
+ #define VCXK_BWS_WORD_CLEAR(x, mask) vcxk_bws_word[x] &= ~mask;
#define VCXK_BWS_LONG(x, data) vcxk_bws_long[x] = data;
#else
u_char double_bws[16384];
@@ -83,7 +83,7 @@
#endif
#define VC4K16_Bright1 vcxk_bws_word[0x20004 / 2]
-#define VC4K16_Bright2 vcxk_bws_word[0x20006 / 2]
+#define VC4K16_Bright2 vcxk_bws_word[0x20006 / 2]
#define VC2K_Bright vcxk_bws[0x8000]
#define VC8K_BrightH vcxk_bws[0xC000]
#define VC8K_BrightL vcxk_bws[0xC001]
@@ -263,7 +263,7 @@
* set the display brightness
* PARAMETER
* side 1 set front side brightness
- * 2 set back side brightness
+ * 2 set back side brightness
* 3 set brightness for both sides
* brightness 0..1000
***
@@ -276,7 +276,7 @@
VC4K16_Bright1 = brightness + 23;
if ((side == 0) || (side & 0x2))
VC4K16_Bright2 = brightness + 23;
- } else {
+ } else {
VC2K_Bright = (brightness >> 4) + 2;
VC8K_BrightH = (brightness + 23) >> 8;
VC8K_BrightL = (brightness + 23) & 0xFF;
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index 523d8a8..98d2965 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -54,7 +54,7 @@
* Freescale mx23evk/mx28evk with a Seiko 4.3'' WVGA panel:
* setenv videomode
* video=ctfb:x:800,y:480,depth:24,mode:0,pclk:29851,
- * le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0
+ * le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0
*/
static void mxs_lcd_init(struct udevice *dev, u32 fb_addr,
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index cebea42..c30ed82 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -4,8 +4,8 @@
* Watchdog driver for Orion/Kirkwood processors
*
* Authors: Tomas Hlavacek <tmshlvck@gmail.com>
- * Sylver Bruneau <sylver.bruneau@googlemail.com>
- * Marek Behun <marek.behun@nic.cz>
+ * Sylver Bruneau <sylver.bruneau@googlemail.com>
+ * Marek Behun <marek.behun@nic.cz>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any