arm nomadik: use 1000 as HZ value and rewrite timer code
This sets CONFIG_SYS_HZ to 1000 as required, and completely rewrites
timer code, which is now both correct and much smaller. Unused
functions like udelay_masked() have been removed as no driver uses
them, even the ones that are not currently active for this board.
mtu.h is copied literally from the kernel sources.
Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/include/asm-arm/arch-nomadik/mtu.h b/include/asm-arm/arch-nomadik/mtu.h
new file mode 100644
index 0000000..a87be9e
--- /dev/null
+++ b/include/asm-arm/arch-nomadik/mtu.h
@@ -0,0 +1,66 @@
+/*
+ * (C) Copyright 2009 Alessandro Rubini
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_MTU_H
+#define __ASM_ARCH_MTU_H
+
+/*
+ * The MTU device hosts four different counters, with 4 set of
+ * registers. These are register names.
+ */
+
+#define MTU_IMSC 0x00 /* Interrupt mask set/clear */
+#define MTU_RIS 0x04 /* Raw interrupt status */
+#define MTU_MIS 0x08 /* Masked interrupt status */
+#define MTU_ICR 0x0C /* Interrupt clear register */
+
+/* per-timer registers take 0..3 as argument */
+#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */
+#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */
+#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */
+#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */
+
+/* bits for the control register */
+#define MTU_CRn_ENA 0x80
+#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */
+#define MTU_CRn_PRESCALE_MASK 0x0c
+#define MTU_CRn_PRESCALE_1 0x00
+#define MTU_CRn_PRESCALE_16 0x04
+#define MTU_CRn_PRESCALE_256 0x08
+#define MTU_CRn_32BITS 0x02
+#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/
+
+/* Other registers are usual amba/primecell registers, currently not used */
+#define MTU_ITCR 0xff0
+#define MTU_ITOP 0xff4
+
+#define MTU_PERIPH_ID0 0xfe0
+#define MTU_PERIPH_ID1 0xfe4
+#define MTU_PERIPH_ID2 0xfe8
+#define MTU_PERIPH_ID3 0xfeC
+
+#define MTU_PCELL0 0xff0
+#define MTU_PCELL1 0xff4
+#define MTU_PCELL2 0xff8
+#define MTU_PCELL3 0xffC
+
+#endif /* __ASM_ARCH_MTU_H */
diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h
index bf1a915..3e2e09f 100644
--- a/include/configs/nhk8815.h
+++ b/include/configs/nhk8815.h
@@ -96,7 +96,7 @@
#define CONFIG_MISC_INIT_R /* call misc_init_r during start up */
/* timing informazion */
-#define CONFIG_SYS_HZ (2400000 / 256) /* Timer0: 2.4Mhz + divider */
+#define CONFIG_SYS_HZ 1000 /* Mandatory... */
#define CONFIG_SYS_TIMERBASE 0x101E2000
/* serial port (PL011) configuration */