mmc: change magic number to macro define
Previous magic number is hard to parse its meaning, change it to
respective macro definition
Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: WOlfgang Denk <wd@denx.de>
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 3f59687..ac26db1 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -638,7 +638,7 @@
if (err)
return err;
- cardtype = ext_csd[196] & 0xf;
+ cardtype = ext_csd[EXT_CSD_CARD_TYPE] & 0xf;
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, 1);
@@ -652,7 +652,7 @@
return err;
/* No high-speed support */
- if (!ext_csd[185])
+ if (!ext_csd[EXT_CSD_HS_TIMING])
return 0;
/* High Speed is set, there are two types: 52MHz and 26MHz */
@@ -1006,14 +1006,16 @@
if (!IS_SD(mmc) && (mmc->version >= MMC_VERSION_4)) {
/* check ext_csd version and capacity */
err = mmc_send_ext_csd(mmc, ext_csd);
- if (!err & (ext_csd[192] >= 2)) {
+ if (!err & (ext_csd[EXT_CSD_REV] >= 2)) {
/*
* According to the JEDEC Standard, the value of
* ext_csd's capacity is valid if the value is more
* than 2GB
*/
- capacity = ext_csd[212] << 0 | ext_csd[213] << 8 |
- ext_csd[214] << 16 | ext_csd[215] << 24;
+ capacity = ext_csd[EXT_CSD_SEC_CNT] << 0
+ | ext_csd[EXT_CSD_SEC_CNT + 1] << 8
+ | ext_csd[EXT_CSD_SEC_CNT + 2] << 16
+ | ext_csd[EXT_CSD_SEC_CNT + 3] << 24;
capacity *= 512;
if ((capacity >> 20) > 2 * 1024)
mmc->capacity = capacity;
@@ -1024,8 +1026,9 @@
* group size from ext_csd directly, or calculate
* the group size from the csd value.
*/
- if (ext_csd[175])
- mmc->erase_grp_size = ext_csd[224] * 512 * 1024;
+ if (ext_csd[EXT_CSD_ERASE_GROUP_DEF])
+ mmc->erase_grp_size =
+ ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] * 512 * 1024;
else {
int erase_gsz, erase_gmul;
erase_gsz = (mmc->csd[2] & 0x00007c00) >> 10;
@@ -1035,8 +1038,8 @@
}
/* store the partition info of emmc */
- if (ext_csd[160] & PART_SUPPORT)
- mmc->part_config = ext_csd[179];
+ if (ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT)
+ mmc->part_config = ext_csd[EXT_CSD_PART_CONF];
}
if (IS_SD(mmc))