Initial revision
diff --git a/board/mpl/common/usb_uhci.h b/board/mpl/common/usb_uhci.h
new file mode 100644
index 0000000..8c8f161
--- /dev/null
+++ b/board/mpl/common/usb_uhci.h
@@ -0,0 +1,190 @@
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Note: Part of this code has been derived from linux
+ *
+ */
+#ifndef _USB_UHCI_H_
+#define _USB_UHCI_H_
+
+
+/* Command register */
+#define USBCMD 0
+#define USBCMD_RS 0x0001 /* Run/Stop */
+#define USBCMD_HCRESET 0x0002 /* Host reset */
+#define USBCMD_GRESET 0x0004 /* Global reset */
+#define USBCMD_EGSM 0x0008 /* Global Suspend Mode */
+#define USBCMD_FGR 0x0010 /* Force Global Resume */
+#define USBCMD_SWDBG 0x0020 /* SW Debug mode */
+#define USBCMD_CF 0x0040 /* Config Flag (sw only) */
+#define USBCMD_MAXP 0x0080 /* Max Packet (0 = 32, 1 = 64) */
+
+/* Status register */
+#define USBSTS 2
+#define USBSTS_USBINT 0x0001 /* Interrupt due to IOC */
+#define USBSTS_ERROR 0x0002 /* Interrupt due to error */
+#define USBSTS_RD 0x0004 /* Resume Detect */
+#define USBSTS_HSE 0x0008 /* Host System Error - basically PCI problems */
+#define USBSTS_HCPE 0x0010 /* Host Controller Process Error - the scripts were buggy */
+#define USBSTS_HCH 0x0020 /* HC Halted */
+
+/* Interrupt enable register */
+#define USBINTR 4
+#define USBINTR_TIMEOUT 0x0001 /* Timeout/CRC error enable */
+#define USBINTR_RESUME 0x0002 /* Resume interrupt enable */
+#define USBINTR_IOC 0x0004 /* Interrupt On Complete enable */
+#define USBINTR_SP 0x0008 /* Short packet interrupt enable */
+
+#define USBFRNUM 6
+#define USBFLBASEADD 8
+#define USBSOF 12
+
+/* USB port status and control registers */
+#define USBPORTSC1 16
+#define USBPORTSC2 18
+#define USBPORTSC_CCS 0x0001 /* Current Connect Status ("device present") */
+#define USBPORTSC_CSC 0x0002 /* Connect Status Change */
+#define USBPORTSC_PE 0x0004 /* Port Enable */
+#define USBPORTSC_PEC 0x0008 /* Port Enable Change */
+#define USBPORTSC_LS 0x0030 /* Line Status */
+#define USBPORTSC_RD 0x0040 /* Resume Detect */
+#define USBPORTSC_LSDA 0x0100 /* Low Speed Device Attached */
+#define USBPORTSC_PR 0x0200 /* Port Reset */
+#define USBPORTSC_SUSP 0x1000 /* Suspend */
+
+/* Legacy support register */
+#define USBLEGSUP 0xc0
+#define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
+
+#define UHCI_NULL_DATA_SIZE 0x7ff /* for UHCI controller TD */
+#define UHCI_PID 0xff /* PID MASK */
+
+#define UHCI_PTR_BITS 0x000F
+#define UHCI_PTR_TERM 0x0001
+#define UHCI_PTR_QH 0x0002
+#define UHCI_PTR_DEPTH 0x0004
+
+/* for TD <status>: */
+#define TD_CTRL_SPD (1 << 29) /* Short Packet Detect */
+#define TD_CTRL_C_ERR_MASK (3 << 27) /* Error Counter bits */
+#define TD_CTRL_LS (1 << 26) /* Low Speed Device */
+#define TD_CTRL_IOS (1 << 25) /* Isochronous Select */
+#define TD_CTRL_IOC (1 << 24) /* Interrupt on Complete */
+#define TD_CTRL_ACTIVE (1 << 23) /* TD Active */
+#define TD_CTRL_STALLED (1 << 22) /* TD Stalled */
+#define TD_CTRL_DBUFERR (1 << 21) /* Data Buffer Error */
+#define TD_CTRL_BABBLE (1 << 20) /* Babble Detected */
+#define TD_CTRL_NAK (1 << 19) /* NAK Received */
+#define TD_CTRL_CRCTIMEO (1 << 18) /* CRC/Time Out Error */
+#define TD_CTRL_BITSTUFF (1 << 17) /* Bit Stuff Error */
+#define TD_CTRL_ACTLEN_MASK 0x7ff /* actual length, encoded as n - 1 */
+
+#define TD_CTRL_ANY_ERROR (TD_CTRL_STALLED | TD_CTRL_DBUFERR | \
+ TD_CTRL_BABBLE | TD_CTRL_CRCTIME | TD_CTRL_BITSTUFF)
+
+#define TD_TOKEN_TOGGLE 19
+
+/* ------------------------------------------------------------------------------------
+ Virtual Root HUB
+ ------------------------------------------------------------------------------------ */
+/* destination of request */
+#define RH_INTERFACE 0x01
+#define RH_ENDPOINT 0x02
+#define RH_OTHER 0x03
+
+#define RH_CLASS 0x20
+#define RH_VENDOR 0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS 0x0080
+#define RH_CLEAR_FEATURE 0x0100
+#define RH_SET_FEATURE 0x0300
+#define RH_SET_ADDRESS 0x0500
+#define RH_GET_DESCRIPTOR 0x0680
+#define RH_SET_DESCRIPTOR 0x0700
+#define RH_GET_CONFIGURATION 0x0880
+#define RH_SET_CONFIGURATION 0x0900
+#define RH_GET_STATE 0x0280
+#define RH_GET_INTERFACE 0x0A80
+#define RH_SET_INTERFACE 0x0B00
+#define RH_SYNC_FRAME 0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP 0x2000
+
+/* Hub port features */
+#define RH_PORT_CONNECTION 0x00
+#define RH_PORT_ENABLE 0x01
+#define RH_PORT_SUSPEND 0x02
+#define RH_PORT_OVER_CURRENT 0x03
+#define RH_PORT_RESET 0x04
+#define RH_PORT_POWER 0x08
+#define RH_PORT_LOW_SPEED 0x09
+#define RH_C_PORT_CONNECTION 0x10
+#define RH_C_PORT_ENABLE 0x11
+#define RH_C_PORT_SUSPEND 0x12
+#define RH_C_PORT_OVER_CURRENT 0x13
+#define RH_C_PORT_RESET 0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER 0x00
+#define RH_C_HUB_OVER_CURRENT 0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP 0x00
+#define RH_ENDPOINT_STALL 0x01
+
+/* Our Vendor Specific feature */
+#define RH_REMOVE_EP 0x00
+
+
+#define RH_ACK 0x01
+#define RH_REQ_ERR -1
+#define RH_NACK 0x00
+
+
+/* Transfer descriptor structure */
+typedef struct {
+ unsigned long link; /* next td/qh (LE)*/
+ unsigned long status; /* status of the td */
+ unsigned long info; /* Max Lenght / Endpoint / device address and PID */
+ unsigned long buffer; /* pointer to data buffer (LE) */
+ unsigned long dev_ptr; /* pointer to the assigned device (BE) */
+ unsigned long res[3]; /* reserved (TDs must be 8Byte aligned) */
+} uhci_td_t, *puhci_td_t;
+
+/* Queue Header structure */
+typedef struct {
+ unsigned long head; /* Next QH (LE)*/
+ unsigned long element; /* Queue element pointer (LE) */
+ unsigned long res[5]; /* reserved */
+ unsigned long dev_ptr; /* if 0 no tds have been assigned to this qh */
+} uhci_qh_t, *puhci_qh_t;
+
+struct virt_root_hub {
+ int devnum; /* Address of Root Hub endpoint */
+ int numports; /* number of ports */
+ int c_p_r[8]; /* C_PORT_RESET */
+};
+
+
+#endif /* _USB_UHCI_H_ */
+
+