diff --git a/README.rst b/README.rst
index 1b227e7..ff4d938 100644
--- a/README.rst
+++ b/README.rst
@@ -9,7 +9,7 @@
 To browse the latest code, see: https://git.openstack.org/cgit/openstack-infra/zuul/tree/
 To clone the latest code, use `git clone git://git.openstack.org/openstack-infra/zuul`
 
-Bugs are handled at: https://launchpad.net/zuul
+Bugs are handled at: https://storyboard.openstack.org/#!/project/679
 
 Code reviews are, as you might expect, handled by gerrit. The gerrit they
 use is http://review.openstack.org
diff --git a/doc/source/triggers.rst b/doc/source/triggers.rst
index dd650f2..5b745e6 100644
--- a/doc/source/triggers.rst
+++ b/doc/source/triggers.rst
@@ -34,6 +34,10 @@
 be added to Gerrit.  Zuul is very flexible and can take advantage of
 those.
 
+If using Gerrit 2.7 or later, make sure the user is a member of a group
+that is granted the ``Stream Events`` permission, otherwise it will not
+be able to invoke the ``gerrit stream-events`` command over SSH.
+
 Timer
 -----
 
diff --git a/doc/source/zuul.rst b/doc/source/zuul.rst
index 6cb5d59..6e9fb05 100644
--- a/doc/source/zuul.rst
+++ b/doc/source/zuul.rst
@@ -86,6 +86,8 @@
 zuul
 """"
 
+.. _layout_config:
+
 **layout_config**
   Path to layout config file.  Used by zuul-server only.
   ``layout_config=/etc/zuul/layout.yaml``
@@ -272,10 +274,12 @@
     - python-file: local_functions.py
 
 **python-file**
-  The path to a python file.  The file will be loaded and objects that
-  it defines will be placed in a special environment which can be
-  referenced in the Zuul configuration.  Currently only the
-  parameter-function attribute of a Job uses this feature.
+  The path to a python file (either an absolute path or relative to the
+  directory name of :ref:`layout_config <layout_config>`).  The
+  file will be loaded and objects that it defines will be placed in a
+  special environment which can be referenced in the Zuul configuration.
+  Currently only the parameter-function attribute of a Job uses this
+  feature.
 
 Pipelines
 """""""""
@@ -462,7 +466,8 @@
     This may be used for any event.  It requires that a certain kind
     of approval be present for the current patchset of the change (the
     approval could be added by the event in question).  It follows the
-    same syntax as the "approval" pipeline requirement below.
+    same syntax as the :ref:`"approval" pipeline requirement below
+    <pipeline-require-approval>`.
 
   **timer**
     This trigger will run based on a cron-style time specification.
@@ -497,7 +502,8 @@
     This may be used for any event.  It requires that a certain kind
     of approval be present for the current patchset of the change (the
     approval could be added by the event in question).  It follows the
-    same syntax as the "approval" pipeline requirement below.
+    same syntax as the :ref:`"approval" pipeline requirement below
+    <pipeline-require-approval>`.
 
 
 **require**
@@ -507,6 +513,8 @@
   the conditions specified here must be met or the item will not be
   enqueued.
 
+.. _pipeline-require-approval:
+
   **approval**
   This requires that a certain kind of approval be present for the
   current patchset of the change (the approval could be added by the
@@ -1045,3 +1053,10 @@
 If you send a SIGUSR2 to the zuul-server process, Zuul will dump a stack
 trace for each running thread into its debug log. This is useful for
 tracking down deadlock or otherwise slow threads.
+
+When `yappi <https://code.google.com/p/yappi/>`_ (Yet Another Python
+Profiler) is available, additional functions' and threads' stats are
+emitted as well. The first SIGUSR2 will enable yappi, on the second
+SIGUSR2 it dumps the information collected, resets all yappi state and
+stops profiling. This is to minimize the impact of yappi on a running
+system.
diff --git a/requirements.txt b/requirements.txt
index 50726c0..4c85447 100644
--- a/requirements.txt
+++ b/requirements.txt
@@ -5,7 +5,7 @@
 Paste
 WebOb>=1.2.3,<1.3
 paramiko>=1.8.0
-GitPython>=0.3.2.RC1
+GitPython>=0.3.2.1
 lockfile>=0.8
 ordereddict
 python-daemon
diff --git a/test-requirements.txt b/test-requirements.txt
index 5192de7..c68b2db 100644
--- a/test-requirements.txt
+++ b/test-requirements.txt
@@ -1,9 +1,8 @@
 hacking>=0.9.2,<0.10
 
 coverage>=3.6
-sphinx>=1.1.2,<1.2
+sphinx>=1.1.2,!=1.2.0,!=1.3b1,<1.3
 sphinxcontrib-blockdiag>=0.5.5
-docutils==0.9.1
 discover
 fixtures>=0.3.14
 python-keystoneclient>=0.4.2
diff --git a/tests/base.py b/tests/base.py
index 46c7087..1cafc46 100755
--- a/tests/base.py
+++ b/tests/base.py
@@ -40,6 +40,7 @@
 import six.moves.urllib.parse as urlparse
 import statsd
 import testtools
+from git import GitCommandError
 
 import zuul.scheduler
 import zuul.webapp
@@ -1031,9 +1032,12 @@
     def ref_has_change(self, ref, change):
         path = os.path.join(self.git_root, change.project)
         repo = git.Repo(path)
-        for commit in repo.iter_commits(ref):
-            if commit.message.strip() == ('%s-1' % change.subject):
-                return True
+        try:
+            for commit in repo.iter_commits(ref):
+                if commit.message.strip() == ('%s-1' % change.subject):
+                    return True
+        except GitCommandError:
+            pass
         return False
 
     def job_has_changes(self, *args):
diff --git a/tests/fixtures/layouts/bad_misplaced_ref.yaml b/tests/fixtures/layouts/bad_misplaced_ref.yaml
new file mode 100644
index 0000000..f009c39
--- /dev/null
+++ b/tests/fixtures/layouts/bad_misplaced_ref.yaml
@@ -0,0 +1,13 @@
+pipelines:
+  - name: 'check'
+    manager: IndependentPipelineManager
+    trigger:
+      gerrit:
+        - event: patchset-created
+          ref: /some/ref/path
+
+projects:
+  - name: org/project
+    merge-mode: cherry-pick
+    check:
+      - project-check
diff --git a/zuul/cmd/cloner.py b/zuul/cmd/cloner.py
index a895f24..8922161 100755
--- a/zuul/cmd/cloner.py
+++ b/zuul/cmd/cloner.py
@@ -97,7 +97,7 @@
         zuul_missing = [zuul_opt for zuul_opt, val in vars(args).items()
                         if zuul_opt.startswith('zuul') and val is None]
         if zuul_missing:
-            parser.error(("Some Zuul parameters are not properly set:\n\t%s\n"
+            parser.error(("Some Zuul parameters are not set:\n\t%s\n"
                           "Define them either via environment variables or "
                           "using options above." %
                           "\n\t".join(sorted(zuul_missing))))
diff --git a/zuul/launcher/gearman.py b/zuul/launcher/gearman.py
index 57db7dc..564a554 100644
--- a/zuul/launcher/gearman.py
+++ b/zuul/launcher/gearman.py
@@ -128,7 +128,7 @@
             for connection in self.active_connections:
                 try:
                     req = gear.StatusAdminRequest()
-                    connection.sendAdminRequest(req)
+                    connection.sendAdminRequest(req, timeout=300)
                 except Exception:
                     self.log.exception("Exception while checking functions")
                     continue
@@ -203,7 +203,7 @@
         for connection in self.gearman.active_connections:
             try:
                 req = gear.StatusAdminRequest()
-                connection.sendAdminRequest(req)
+                connection.sendAdminRequest(req, timeout=300)
             except Exception:
                 self.log.exception("Exception while checking functions")
                 continue
@@ -361,15 +361,16 @@
             precedence = gear.PRECEDENCE_LOW
 
         try:
-            self.gearman.submitJob(gearman_job, precedence=precedence)
+            self.gearman.submitJob(gearman_job, precedence=precedence,
+                                   timeout=300)
         except Exception:
             self.log.exception("Unable to submit job to Gearman")
             self.onBuildCompleted(gearman_job, 'EXCEPTION')
             return build
 
         if not gearman_job.handle:
-            self.log.error("No job handle was received for %s after 30 seconds"
-                           " marking as lost." %
+            self.log.error("No job handle was received for %s after"
+                           " 300 seconds; marking as lost." %
                            gearman_job)
             self.onBuildCompleted(gearman_job, 'NO_HANDLE')
 
@@ -467,7 +468,7 @@
         job = build.__gearman_job
 
         req = gear.CancelJobAdminRequest(job.handle)
-        job.connection.sendAdminRequest(req)
+        job.connection.sendAdminRequest(req, timeout=300)
         self.log.debug("Response to cancel build %s request: %s" %
                        (build, req.response.strip()))
         if req.response.startswith("OK"):
@@ -486,7 +487,8 @@
                             json.dumps(data), unique=stop_uuid)
         self.meta_jobs[stop_uuid] = stop_job
         self.log.debug("Submitting stop job: %s", stop_job)
-        self.gearman.submitJob(stop_job, precedence=gear.PRECEDENCE_HIGH)
+        self.gearman.submitJob(stop_job, precedence=gear.PRECEDENCE_HIGH,
+                               timeout=300)
         return True
 
     def setBuildDescription(self, build, desc):
@@ -507,7 +509,8 @@
         desc_job = gear.Job(name, json.dumps(data), unique=desc_uuid)
         self.meta_jobs[desc_uuid] = desc_job
         self.log.debug("Submitting describe job: %s", desc_job)
-        self.gearman.submitJob(desc_job, precedence=gear.PRECEDENCE_LOW)
+        self.gearman.submitJob(desc_job, precedence=gear.PRECEDENCE_LOW,
+                               timeout=300)
         return True
 
     def lookForLostBuilds(self):
diff --git a/zuul/layoutvalidator.py b/zuul/layoutvalidator.py
index 9a4e00f..6969653 100644
--- a/zuul/layoutvalidator.py
+++ b/zuul/layoutvalidator.py
@@ -18,6 +18,7 @@
 import voluptuous as v
 import string
 
+from zuul.trigger import gerrit
 
 # Several forms accept either a single item or a list, this makes
 # specifying that in the schema easy (and explicit).
@@ -271,3 +272,7 @@
         if 'project-templates' in data:
             self.checkDuplicateNames(
                 data['project-templates'], ['project-templates'])
+        for pipeline in data['pipelines']:
+            if 'gerrit' in pipeline['trigger']:
+                gerrit.validate_trigger(pipeline['trigger'])
+
diff --git a/zuul/lib/gerrit.py b/zuul/lib/gerrit.py
index 52e6057..5aad953 100644
--- a/zuul/lib/gerrit.py
+++ b/zuul/lib/gerrit.py
@@ -145,21 +145,34 @@
         return data
 
     def simpleQuery(self, query):
-        args = '--current-patch-set'
-        cmd = 'gerrit query --format json %s %s' % (
-            args, query)
-        out, err = self._ssh(cmd)
-        if not out:
-            return False
-        lines = out.split('\n')
-        if not lines:
-            return False
-        data = [json.loads(line) for line in lines[:-1]]
-        if not data:
-            return False
-        self.log.debug("Received data from Gerrit query: \n%s" %
-                       (pprint.pformat(data)))
-        return data
+        def _query_chunk(query):
+            args = '--current-patch-set'
+
+            cmd = 'gerrit query --format json %s %s' % (
+                args, query)
+            out, err = self._ssh(cmd)
+            if not out:
+                return False
+            lines = out.split('\n')
+            if not lines:
+                return False
+            data = [json.loads(line) for line in lines
+                    if "sortKey" in line]
+            if not data:
+                return False
+            self.log.debug("Received data from Gerrit query: \n%s" %
+                           (pprint.pformat(data)))
+            return data
+
+        # gerrit returns 500 results by default, so implement paging
+        # for large projects like nova
+        alldata = []
+        chunk = _query_chunk(query)
+        while(chunk):
+            alldata.extend(chunk)
+            sortkey = "resume_sortkey:'%s'" % chunk[-1]["sortKey"]
+            chunk = _query_chunk("%s %s" % (query, sortkey))
+        return alldata
 
     def _open(self):
         client = paramiko.SSHClient()
diff --git a/zuul/merger/client.py b/zuul/merger/client.py
index 8c41563..8d8f7ee 100644
--- a/zuul/merger/client.py
+++ b/zuul/merger/client.py
@@ -89,7 +89,8 @@
                        json.dumps(data),
                        unique=uuid)
         self.build_sets[uuid] = build_set
-        self.gearman.submitJob(job, precedence=precedence)
+        self.gearman.submitJob(job, precedence=precedence,
+                               timeout=300)
 
     def mergeChanges(self, items, build_set,
                      precedence=zuul.model.PRECEDENCE_NORMAL):
diff --git a/zuul/model.py b/zuul/model.py
index b03bbb0..67ce8be 100644
--- a/zuul/model.py
+++ b/zuul/model.py
@@ -709,6 +709,10 @@
         ret['project'] = changeish.project.name
         ret['enqueue_time'] = int(self.enqueue_time * 1000)
         ret['jobs'] = []
+        if hasattr(changeish, 'owner'):
+            ret['owner'] = changeish.owner
+        else:
+            ret['owner'] = None
         max_remaining = 0
         for job in self.pipeline.getJobs(changeish):
             now = time.time()
@@ -857,6 +861,7 @@
         self.approvals = []
         self.open = None
         self.status = None
+        self.owner = None
 
     def _id(self):
         return '%s,%s' % (self.number, self.patchset)
diff --git a/zuul/rpcclient.py b/zuul/rpcclient.py
index 7f572be..f43c3b9 100644
--- a/zuul/rpcclient.py
+++ b/zuul/rpcclient.py
@@ -38,7 +38,7 @@
         job = gear.Job(name,
                        json.dumps(data),
                        unique=str(time.time()))
-        self.gearman.submitJob(job)
+        self.gearman.submitJob(job, timeout=300)
 
         self.log.debug("Waiting for job completion")
         while not job.complete:
diff --git a/zuul/scheduler.py b/zuul/scheduler.py
index d06693e..25f3ae0 100644
--- a/zuul/scheduler.py
+++ b/zuul/scheduler.py
@@ -226,7 +226,7 @@
             if 'python-file' in include:
                 fn = include['python-file']
                 if not os.path.isabs(fn):
-                    base = os.path.dirname(config_path)
+                    base = os.path.dirname(os.path.realpath(config_path))
                     fn = os.path.join(base, fn)
                 fn = os.path.expanduser(fn)
                 execfile(fn, config_env)
diff --git a/zuul/trigger/gerrit.py b/zuul/trigger/gerrit.py
index 6966488..0c0a376 100644
--- a/zuul/trigger/gerrit.py
+++ b/zuul/trigger/gerrit.py
@@ -16,6 +16,7 @@
 import threading
 import time
 import urllib2
+import voluptuous
 from zuul.lib import gerrit
 from zuul.model import TriggerEvent, Change, Ref, NullChange
 
@@ -330,7 +331,7 @@
         self.log.debug("Running query %s to get project open changes" % (query,))
         data = self.gerrit.simpleQuery(query)
         changes = []
-        for record in data[:-1]:
+        for record in data:
             try:
                 changes.append(self._getChange(record['number'],
                                                record['currentPatchSet']['number']))
@@ -371,6 +372,7 @@
         change.approvals = data['currentPatchSet'].get('approvals', [])
         change.open = data['open']
         change.status = data['status']
+        change.owner = data['owner']
 
         if change.is_merged:
             # This change is merged, so we don't need to look any further
@@ -411,3 +413,14 @@
         if sha:
             url += ';a=commitdiff;h=' + sha
         return url
+
+
+def validate_trigger(trigger_data):
+    """Validates the layout's trigger data."""
+    events_with_ref = ('ref-updated', )
+    for event in trigger_data['gerrit']:
+        if event['event'] not in events_with_ref and event.get('ref', False):
+            raise voluptuous.Invalid(
+                "The event %s does not include ref information, Zuul cannot "
+                "use ref filter 'ref: %s'" % (event['event'], event['ref']))
+