diff --git a/doc/source/admin/components.rst b/doc/source/admin/components.rst
index 86b01ef..3bec28a 100644
--- a/doc/source/admin/components.rst
+++ b/doc/source/admin/components.rst
@@ -287,7 +287,7 @@
 
 .. attr:: merger
 
-   ,, attr:: command_socket
+   .. attr:: command_socket
       :default: /var/lib/zuul/merger.socket
 
       Path to command socket file for the merger process.
@@ -627,3 +627,65 @@
 
 To start the web server, run ``zuul-web``.  To stop it, kill the
 PID which was saved in the pidfile specified in the configuration.
+
+Finger Gateway
+--------------
+
+The Zuul finger gateway listens on the standard finger port (79) for
+finger requests specifying a build UUID for which it should stream log
+results. The gateway will determine which executor is currently running that
+build and query that executor for the log stream.
+
+This is intended to be used with the standard finger command line client.
+For example::
+
+    finger UUID@zuul.example.com
+
+The above would stream the logs for the build identified by `UUID`.
+
+Configuration
+~~~~~~~~~~~~~
+
+In addition to the common configuration sections, the following
+sections of ``zuul.conf`` are used by the finger gateway:
+
+.. attr:: fingergw
+
+   .. attr:: command_socket
+      :default: /var/lib/zuul/fingergw.socket
+
+      Path to command socket file for the executor process.
+
+   .. attr:: listen_address
+      :default: all addresses
+
+      IP address or domain name on which to listen.
+
+   .. attr:: log_config
+
+      Path to log config file for the finger gateway process.
+
+   .. attr:: pidfile
+      :default: /var/run/zuul-fingergw/zuul-fingergw.pid
+
+      Path to PID lock file for the finger gateway process.
+
+   .. attr:: port
+      :default: 79
+
+      Port to use for the finger gateway. Note that since command line
+      finger clients cannot usually specify the port, leaving this set to
+      the default value is highly recommended.
+
+   .. attr:: user
+      :default: zuul
+
+      User ID for the zuul-fingergw process. In normal operation as a
+      daemon, the finger gateway should be started as the ``root`` user, but
+      it will drop privileges to this user during startup.
+
+Operation
+~~~~~~~~~
+
+To start the finger gateway, run ``zuul-fingergw``.  To stop it, kill the
+PID which was saved in the pidfile specified in the configuration.
diff --git a/doc/source/admin/drivers/github.rst b/doc/source/admin/drivers/github.rst
index 8dd7764..4f46af6 100644
--- a/doc/source/admin/drivers/github.rst
+++ b/doc/source/admin/drivers/github.rst
@@ -18,9 +18,11 @@
 Web-Hook
 ........
 
-To configure a project's `webhook events <https://developer.github.com/webhooks/creating/>`_:
+To configure a project's `webhook events
+<https://developer.github.com/webhooks/creating/>`_:
 
-* Set *Payload URL* to ``http://<zuul-hostname>/connection/<connection-name>/payload``.
+* Set *Payload URL* to
+  ``http://<zuul-hostname>/connection/<connection-name>/payload``.
 
 * Set *Content Type* to ``application/json``.
 
@@ -30,22 +32,27 @@
 
 * Zuul public key needs to be added to the GitHub account
 
-* A api_token needs to be created too, see this `article <See https://help.github.com/articles/creating-an-access-token-for-command-line-use/>`_
+* A api_token needs to be created too, see this `article
+  <https://help.github.com/articles/creating-an-access-token-for-command-line-use/>`_
 
 Then in the zuul.conf, set webhook_token and api_token.
 
 Application
 ...........
 
-To create a `GitHub application <https://developer.github.com/apps/building-integrations/setting-up-and-registering-github-apps/registering-github-apps/>`_:
+To create a `GitHub application
+<https://developer.github.com/apps/building-integrations/setting-up-and-registering-github-apps/registering-github-apps/>`_:
 
-* Go to your organization settings page to create the application, e.g.: https://github.com/organizations/my-org/settings/apps/new
+* Go to your organization settings page to create the application, e.g.:
+  https://github.com/organizations/my-org/settings/apps/new
 
 * Set GitHub App name to "my-org-zuul"
 
-* Set Setup URL to your setup documentation, when user install the application they are redirected to this url
+* Set Setup URL to your setup documentation, when user install the application
+  they are redirected to this url
 
-* Set Webhook URL to ``http://<zuul-hostname>/connection/<connection-name>/payload``.
+* Set Webhook URL to
+  ``http://<zuul-hostname>/connection/<connection-name>/payload``.
 
 * Create a Webhook secret
 
@@ -93,7 +100,8 @@
 After restarting zuul-scheduler, verify in the 'Advanced' tab that the
 Ping payload works (green tick and 200 response)
 
-Users can now install the application using its public page, e.g.: https://github.com/apps/my-org-zuul
+Users can now install the application using its public page, e.g.:
+https://github.com/apps/my-org-zuul
 
 
 Connection Configuration
diff --git a/doc/source/admin/drivers/sql.rst b/doc/source/admin/drivers/sql.rst
index a269f5d..b9ce24b 100644
--- a/doc/source/admin/drivers/sql.rst
+++ b/doc/source/admin/drivers/sql.rst
@@ -43,6 +43,14 @@
       <http://docs.sqlalchemy.org/en/latest/core/pooling.html#setting-pool-recycle>`_
       for more information.
 
+   .. attr:: table_prefix
+      :default: ''
+
+      The string to prefix the table names. This makes it possible to run
+      several zuul deployments against the same database. This can be useful
+      if you rely on external databases which you don't have under control.
+      The default is to have no prefix.
+
 Reporter Configuration
 ----------------------
 
diff --git a/etc/status/public_html/zuul.app.js b/etc/status/public_html/zuul.app.js
index 7ceb2dd..bf90a4d 100644
--- a/etc/status/public_html/zuul.app.js
+++ b/etc/status/public_html/zuul.app.js
@@ -28,8 +28,6 @@
 function zuul_build_dom($, container) {
     // Build a default-looking DOM
     var default_layout = '<div class="container">'
-        + '<h1>Zuul Status</h1>'
-        + '<p>Real-time status monitor of Zuul, the pipeline manager between Gerrit and Workers.</p>'
         + '<div class="zuul-container" id="zuul-container">'
         + '<div style="display: none;" class="alert" id="zuul_msg"></div>'
         + '<button class="btn pull-right zuul-spinner">updating <span class="glyphicon glyphicon-refresh"></span></button>'
diff --git a/setup.cfg b/setup.cfg
index 63ff562..dea3158 100644
--- a/setup.cfg
+++ b/setup.cfg
@@ -28,6 +28,7 @@
     zuul-bwrap = zuul.driver.bubblewrap:main
     zuul-web = zuul.cmd.web:main
     zuul-migrate = zuul.cmd.migrate:main
+    zuul-fingergw = zuul.cmd.fingergw:main
 
 [build_sphinx]
 source-dir = doc/source
diff --git a/tests/base.py b/tests/base.py
index ea01d20..69d9f55 100755
--- a/tests/base.py
+++ b/tests/base.py
@@ -2421,7 +2421,7 @@
                      'pydevd.CommandThread',
                      'pydevd.Reader',
                      'pydevd.Writer',
-                     'FingerStreamer',
+                     'socketserver_Thread',
                      ]
         threads = [t for t in threading.enumerate()
                    if t.name not in whitelist]
diff --git a/tests/fixtures/zuul-sql-driver-prefix.conf b/tests/fixtures/zuul-sql-driver-prefix.conf
new file mode 100644
index 0000000..1406474
--- /dev/null
+++ b/tests/fixtures/zuul-sql-driver-prefix.conf
@@ -0,0 +1,28 @@
+[gearman]
+server=127.0.0.1
+
+[scheduler]
+tenant_config=main.yaml
+
+[merger]
+git_dir=/tmp/zuul-test/merger-git
+git_user_email=zuul@example.com
+git_user_name=zuul
+
+[executor]
+git_dir=/tmp/zuul-test/executor-git
+
+[connection gerrit]
+driver=gerrit
+server=review.example.com
+user=jenkins
+sshkey=fake_id_rsa1
+
+[connection resultsdb]
+driver=sql
+dburi=$MYSQL_FIXTURE_DBURI$
+table_prefix=prefix_
+
+[connection resultsdb_failures]
+driver=sql
+dburi=$MYSQL_FIXTURE_DBURI$
diff --git a/tests/unit/test_connection.py b/tests/unit/test_connection.py
index c882d3a..054ee5f 100644
--- a/tests/unit/test_connection.py
+++ b/tests/unit/test_connection.py
@@ -60,14 +60,19 @@
 class TestSQLConnection(ZuulDBTestCase):
     config_file = 'zuul-sql-driver.conf'
     tenant_config_file = 'config/sql-driver/main.yaml'
+    expected_table_prefix = ''
 
-    def test_sql_tables_created(self, metadata_table=None):
+    def test_sql_tables_created(self):
         "Test the tables for storing results are created properly"
-        buildset_table = 'zuul_buildset'
-        build_table = 'zuul_build'
 
-        insp = sa.engine.reflection.Inspector(
-            self.connections.connections['resultsdb'].engine)
+        connection = self.connections.connections['resultsdb']
+        insp = sa.engine.reflection.Inspector(connection.engine)
+
+        table_prefix = connection.table_prefix
+        self.assertEqual(self.expected_table_prefix, table_prefix)
+
+        buildset_table = table_prefix + 'zuul_buildset'
+        build_table = table_prefix + 'zuul_build'
 
         self.assertEqual(13, len(insp.get_columns(buildset_table)))
         self.assertEqual(10, len(insp.get_columns(build_table)))
@@ -216,6 +221,11 @@
             'Build failed.', buildsets_resultsdb_failures[0]['message'])
 
 
+class TestSQLConnectionPrefix(TestSQLConnection):
+    config_file = 'zuul-sql-driver-prefix.conf'
+    expected_table_prefix = 'prefix_'
+
+
 class TestConnectionsBadSQL(ZuulDBTestCase):
     config_file = 'zuul-sql-driver-bad.conf'
     tenant_config_file = 'config/sql-driver/main.yaml'
diff --git a/tests/unit/test_log_streamer.py b/tests/unit/test_streaming.py
similarity index 68%
rename from tests/unit/test_log_streamer.py
rename to tests/unit/test_streaming.py
index 27368e3..4bb541a 100644
--- a/tests/unit/test_log_streamer.py
+++ b/tests/unit/test_streaming.py
@@ -28,6 +28,7 @@
 
 import zuul.web
 import zuul.lib.log_streamer
+import zuul.lib.fingergw
 import tests.base
 
 
@@ -60,7 +61,7 @@
 class TestStreaming(tests.base.AnsibleZuulTestCase):
 
     tenant_config_file = 'config/streamer/main.yaml'
-    log = logging.getLogger("zuul.test.test_log_streamer.TestStreaming")
+    log = logging.getLogger("zuul.test_streaming")
 
     def setUp(self):
         super(TestStreaming, self).setUp()
@@ -181,9 +182,38 @@
         loop.run_until_complete(client(loop, build_uuid, event))
         loop.close()
 
+    def runFingerClient(self, build_uuid, gateway_address, event):
+        # Wait until the gateway is started
+        while True:
+            try:
+                # NOTE(Shrews): This causes the gateway to begin to handle
+                # a request for which it never receives data, and thus
+                # causes the getCommand() method to timeout (seen in the
+                # test results, but is harmless).
+                with socket.create_connection(gateway_address) as s:
+                    break
+            except ConnectionRefusedError:
+                time.sleep(0.1)
+
+        with socket.create_connection(gateway_address) as s:
+            msg = "%s\n" % build_uuid
+            s.sendall(msg.encode('utf-8'))
+            event.set()  # notify we are connected and req sent
+            while True:
+                data = s.recv(1024)
+                if not data:
+                    break
+                self.streaming_data += data.decode('utf-8')
+            s.shutdown(socket.SHUT_RDWR)
+
     def test_websocket_streaming(self):
+        # Start the finger streamer daemon
+        streamer = zuul.lib.log_streamer.LogStreamer(
+            None, self.host, 0, self.executor_server.jobdir_root)
+        self.addCleanup(streamer.stop)
+
         # Need to set the streaming port before submitting the job
-        finger_port = 7902
+        finger_port = streamer.server.socket.getsockname()[1]
         self.executor_server.log_streaming_port = finger_port
 
         A = self.fake_gerrit.addFakeChange('org/project', 'master', 'A')
@@ -216,11 +246,6 @@
         logfile = open(ansible_log, 'r')
         self.addCleanup(logfile.close)
 
-        # Start the finger streamer daemon
-        streamer = zuul.lib.log_streamer.LogStreamer(
-            None, self.host, finger_port, self.executor_server.jobdir_root)
-        self.addCleanup(streamer.stop)
-
         # Start the web server
         web_server = zuul.web.ZuulWeb(
             listen_address='::', listen_port=9000,
@@ -265,3 +290,83 @@
         self.log.debug("\n\nFile contents: %s\n\n", file_contents)
         self.log.debug("\n\nStreamed: %s\n\n", self.ws_client_results)
         self.assertEqual(file_contents, self.ws_client_results)
+
+    def test_finger_gateway(self):
+        # Start the finger streamer daemon
+        streamer = zuul.lib.log_streamer.LogStreamer(
+            None, self.host, 0, self.executor_server.jobdir_root)
+        self.addCleanup(streamer.stop)
+        finger_port = streamer.server.socket.getsockname()[1]
+
+        # Need to set the streaming port before submitting the job
+        self.executor_server.log_streaming_port = finger_port
+
+        A = self.fake_gerrit.addFakeChange('org/project', 'master', 'A')
+        self.fake_gerrit.addEvent(A.getPatchsetCreatedEvent(1))
+
+        # We don't have any real synchronization for the ansible jobs, so
+        # just wait until we get our running build.
+        while not len(self.builds):
+            time.sleep(0.1)
+        build = self.builds[0]
+        self.assertEqual(build.name, 'python27')
+
+        build_dir = os.path.join(self.executor_server.jobdir_root, build.uuid)
+        while not os.path.exists(build_dir):
+            time.sleep(0.1)
+
+        # Need to wait to make sure that jobdir gets set
+        while build.jobdir is None:
+            time.sleep(0.1)
+            build = self.builds[0]
+
+        # Wait for the job to begin running and create the ansible log file.
+        # The job waits to complete until the flag file exists, so we can
+        # safely access the log here. We only open it (to force a file handle
+        # to be kept open for it after the job finishes) but wait to read the
+        # contents until the job is done.
+        ansible_log = os.path.join(build.jobdir.log_root, 'job-output.txt')
+        while not os.path.exists(ansible_log):
+            time.sleep(0.1)
+        logfile = open(ansible_log, 'r')
+        self.addCleanup(logfile.close)
+
+        # Start the finger gateway daemon
+        gateway = zuul.lib.fingergw.FingerGateway(
+            ('127.0.0.1', self.gearman_server.port, None, None, None),
+            (self.host, 0),
+            user=None,
+            command_socket=None,
+            pid_file=None
+        )
+        gateway.start()
+        self.addCleanup(gateway.stop)
+
+        gateway_port = gateway.server.socket.getsockname()[1]
+        gateway_address = (self.host, gateway_port)
+
+        # Start a thread with the finger client
+        finger_client_event = threading.Event()
+        self.finger_client_results = ''
+        finger_client_thread = threading.Thread(
+            target=self.runFingerClient,
+            args=(build.uuid, gateway_address, finger_client_event)
+        )
+        finger_client_thread.start()
+        finger_client_event.wait()
+
+        # Allow the job to complete
+        flag_file = os.path.join(build_dir, 'test_wait')
+        open(flag_file, 'w').close()
+
+        # Wait for the finger client to complete, which it should when
+        # it's received the full log.
+        finger_client_thread.join()
+
+        self.waitUntilSettled()
+
+        file_contents = logfile.read()
+        logfile.close()
+        self.log.debug("\n\nFile contents: %s\n\n", file_contents)
+        self.log.debug("\n\nStreamed: %s\n\n", self.streaming_data)
+        self.assertEqual(file_contents, self.streaming_data)
diff --git a/tests/unit/test_v3.py b/tests/unit/test_v3.py
index b9c9b32..1f401d0 100755
--- a/tests/unit/test_v3.py
+++ b/tests/unit/test_v3.py
@@ -935,6 +935,27 @@
         self.assertIn('not a dictionary', A.messages[0],
                       "A should have a syntax error reported")
 
+    def test_yaml_duplicate_key_error(self):
+        in_repo_conf = textwrap.dedent(
+            """
+            - job:
+                name: foo
+                name: bar
+            """)
+
+        file_dict = {'.zuul.yaml': in_repo_conf}
+        A = self.fake_gerrit.addFakeChange('org/project', 'master', 'A',
+                                           files=file_dict)
+        A.addApproval('Code-Review', 2)
+        self.fake_gerrit.addEvent(A.addApproval('Approved', 1))
+        self.waitUntilSettled()
+
+        self.assertEqual(A.data['status'], 'NEW')
+        self.assertEqual(A.reported, 1,
+                         "A should report failure")
+        self.assertIn('appears more than once', A.messages[0],
+                      "A should have a syntax error reported")
+
     def test_yaml_key_error(self):
         in_repo_conf = textwrap.dedent(
             """
diff --git a/tox.ini b/tox.ini
index 28d6000..5efc4c0 100644
--- a/tox.ini
+++ b/tox.ini
@@ -41,9 +41,6 @@
 [testenv:venv]
 commands = {posargs}
 
-[testenv:validate-layout]
-commands = zuul-server -c etc/zuul.conf-sample -t -l {posargs}
-
 [testenv:nodepool]
 setenv =
    OS_TEST_PATH = ./tests/nodepool
diff --git a/zuul/cmd/fingergw.py b/zuul/cmd/fingergw.py
new file mode 100644
index 0000000..920eed8
--- /dev/null
+++ b/zuul/cmd/fingergw.py
@@ -0,0 +1,109 @@
+#!/usr/bin/env python
+# Copyright 2017 Red Hat, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain
+# a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations
+# under the License.
+
+import logging
+import signal
+import sys
+
+import zuul.cmd
+import zuul.lib.fingergw
+
+from zuul.lib.config import get_default
+
+
+class FingerGatewayApp(zuul.cmd.ZuulDaemonApp):
+    '''
+    Class for the daemon that will distribute any finger requests to the
+    appropriate Zuul executor handling the specified build UUID.
+    '''
+    app_name = 'fingergw'
+    app_description = 'The Zuul finger gateway.'
+
+    def __init__(self):
+        super(FingerGatewayApp, self).__init__()
+        self.gateway = None
+
+    def createParser(self):
+        parser = super(FingerGatewayApp, self).createParser()
+        parser.add_argument('command',
+                            choices=zuul.lib.fingergw.COMMANDS,
+                            nargs='?')
+        return parser
+
+    def parseArguments(self, args=None):
+        super(FingerGatewayApp, self).parseArguments()
+        if self.args.command:
+            self.args.nodaemon = True
+
+    def run(self):
+        '''
+        Main entry point for the FingerGatewayApp.
+
+        Called by the main() method of the parent class.
+        '''
+        if self.args.command in zuul.lib.fingergw.COMMANDS:
+            self.send_command(self.args.command)
+            sys.exit(0)
+
+        self.setup_logging('fingergw', 'log_config')
+        self.log = logging.getLogger('zuul.fingergw')
+
+        # Get values from configuration file
+        host = get_default(self.config, 'fingergw', 'listen_address', '::')
+        port = int(get_default(self.config, 'fingergw', 'port', 79))
+        user = get_default(self.config, 'fingergw', 'user', 'zuul')
+        cmdsock = get_default(
+            self.config, 'fingergw', 'command_socket',
+            '/var/lib/zuul/%s.socket' % self.app_name)
+        gear_server = get_default(self.config, 'gearman', 'server')
+        gear_port = get_default(self.config, 'gearman', 'port', 4730)
+        ssl_key = get_default(self.config, 'gearman', 'ssl_key')
+        ssl_cert = get_default(self.config, 'gearman', 'ssl_cert')
+        ssl_ca = get_default(self.config, 'gearman', 'ssl_ca')
+
+        self.gateway = zuul.lib.fingergw.FingerGateway(
+            (gear_server, gear_port, ssl_key, ssl_cert, ssl_ca),
+            (host, port),
+            user,
+            cmdsock,
+            self.getPidFile(),
+        )
+
+        self.log.info('Starting Zuul finger gateway app')
+        self.gateway.start()
+
+        if self.args.nodaemon:
+            # NOTE(Shrews): When running in non-daemon mode, although sending
+            # the 'stop' command via the command socket will shutdown the
+            # gateway, it's still necessary to Ctrl+C to stop the app.
+            while True:
+                try:
+                    signal.pause()
+                except KeyboardInterrupt:
+                    print("Ctrl + C: asking gateway to exit nicely...\n")
+                    self.stop()
+                    break
+        else:
+            self.gateway.wait()
+
+        self.log.info('Stopped Zuul finger gateway app')
+
+    def stop(self):
+        if self.gateway:
+            self.gateway.stop()
+
+
+def main():
+    FingerGatewayApp().main()
diff --git a/zuul/cmd/web.py b/zuul/cmd/web.py
index ad3062f..4687de6 100755
--- a/zuul/cmd/web.py
+++ b/zuul/cmd/web.py
@@ -106,6 +106,8 @@
 
         self.configure_connections()
 
+        signal.signal(signal.SIGUSR2, zuul.cmd.stack_dump_handler)
+
         try:
             self._run()
         except Exception:
diff --git a/zuul/configloader.py b/zuul/configloader.py
index fb1695c..227e352 100644
--- a/zuul/configloader.py
+++ b/zuul/configloader.py
@@ -152,6 +152,40 @@
         super(ProjectNotPermittedError, self).__init__(message)
 
 
+class YAMLDuplicateKeyError(ConfigurationSyntaxError):
+    def __init__(self, key, node, context, start_mark):
+        intro = textwrap.fill(textwrap.dedent("""\
+        Zuul encountered a syntax error while parsing its configuration in the
+        repo {repo} on branch {branch}.  The error was:""".format(
+            repo=context.project.name,
+            branch=context.branch,
+        )))
+
+        e = textwrap.fill(textwrap.dedent("""\
+        The key "{key}" appears more than once; duplicate keys are not
+        permitted.
+        """.format(
+            key=key,
+        )))
+
+        m = textwrap.dedent("""\
+        {intro}
+
+        {error}
+
+        The error appears in the following stanza:
+
+        {content}
+
+        {start_mark}""")
+
+        m = m.format(intro=intro,
+                     error=indent(str(e)),
+                     content=indent(start_mark.snippet.rstrip()),
+                     start_mark=str(start_mark))
+        super(YAMLDuplicateKeyError, self).__init__(m)
+
+
 def indent(s):
     return '\n'.join(['  ' + x for x in s.split('\n')])
 
@@ -249,6 +283,14 @@
         self.zuul_stream = stream
 
     def construct_mapping(self, node, deep=False):
+        keys = set()
+        for k, v in node.value:
+            if k.value in keys:
+                mark = ZuulMark(node.start_mark, node.end_mark,
+                                self.zuul_stream)
+                raise YAMLDuplicateKeyError(k.value, node, self.zuul_context,
+                                            mark)
+            keys.add(k.value)
         r = super(ZuulSafeLoader, self).construct_mapping(node, deep)
         keys = frozenset(r.keys())
         if len(keys) == 1 and keys.intersection(self.zuul_node_types):
diff --git a/zuul/driver/sql/alembic/env.py b/zuul/driver/sql/alembic/env.py
index 4542a22..8cf2ecf 100644
--- a/zuul/driver/sql/alembic/env.py
+++ b/zuul/driver/sql/alembic/env.py
@@ -55,6 +55,13 @@
         prefix='sqlalchemy.',
         poolclass=pool.NullPool)
 
+    # we can get the table prefix via the tag object
+    tag = context.get_tag_argument()
+    if tag and isinstance(tag, dict):
+        table_prefix = tag.get('table_prefix', '')
+    else:
+        table_prefix = ''
+
     with connectable.connect() as connection:
         context.configure(
             connection=connection,
@@ -62,7 +69,7 @@
         )
 
         with context.begin_transaction():
-            context.run_migrations()
+            context.run_migrations(table_prefix=table_prefix)
 
 
 if context.is_offline_mode():
diff --git a/zuul/driver/sql/alembic/versions/1dd914d4a482_allow_score_to_be_null.py b/zuul/driver/sql/alembic/versions/1dd914d4a482_allow_score_to_be_null.py
index b153cab..f42c2f3 100644
--- a/zuul/driver/sql/alembic/versions/1dd914d4a482_allow_score_to_be_null.py
+++ b/zuul/driver/sql/alembic/versions/1dd914d4a482_allow_score_to_be_null.py
@@ -16,8 +16,8 @@
 import sqlalchemy as sa
 
 
-def upgrade():
-    op.alter_column('zuul_buildset', 'score', nullable=True,
+def upgrade(table_prefix=''):
+    op.alter_column(table_prefix + 'zuul_buildset', 'score', nullable=True,
                     existing_type=sa.Integer)
 
 
diff --git a/zuul/driver/sql/alembic/versions/20126015a87d_add_indexes.py b/zuul/driver/sql/alembic/versions/20126015a87d_add_indexes.py
index 12e7c09..906df21 100644
--- a/zuul/driver/sql/alembic/versions/20126015a87d_add_indexes.py
+++ b/zuul/driver/sql/alembic/versions/20126015a87d_add_indexes.py
@@ -32,24 +32,28 @@
 BUILD_TABLE = 'zuul_build'
 
 
-def upgrade():
+def upgrade(table_prefix=''):
+    prefixed_buildset = table_prefix + BUILDSET_TABLE
+    prefixed_build = table_prefix + BUILD_TABLE
+
     # To allow a dashboard to show a per-project view, optionally filtered
     # by pipeline.
     op.create_index(
-        'project_pipeline_idx', BUILDSET_TABLE, ['project', 'pipeline'])
+        'project_pipeline_idx', prefixed_buildset, ['project', 'pipeline'])
 
     # To allow a dashboard to show a per-project-change view
     op.create_index(
-        'project_change_idx', BUILDSET_TABLE, ['project', 'change'])
+        'project_change_idx', prefixed_buildset, ['project', 'change'])
 
     # To allow a dashboard to show a per-change view
-    op.create_index('change_idx', BUILDSET_TABLE, ['change'])
+    op.create_index('change_idx', prefixed_buildset, ['change'])
 
     # To allow a dashboard to show a job lib view. buildset_id is included
     # so that it's a covering index and can satisfy the join back to buildset
     # without an additional lookup.
     op.create_index(
-        'job_name_buildset_id_idx', BUILD_TABLE, ['job_name', 'buildset_id'])
+        'job_name_buildset_id_idx', prefixed_build,
+        ['job_name', 'buildset_id'])
 
 
 def downgrade():
diff --git a/zuul/driver/sql/alembic/versions/4d3ebd7f06b9_set_up_initial_reporter_tables.py b/zuul/driver/sql/alembic/versions/4d3ebd7f06b9_set_up_initial_reporter_tables.py
index 783196f..b78f830 100644
--- a/zuul/driver/sql/alembic/versions/4d3ebd7f06b9_set_up_initial_reporter_tables.py
+++ b/zuul/driver/sql/alembic/versions/4d3ebd7f06b9_set_up_initial_reporter_tables.py
@@ -19,9 +19,9 @@
 BUILD_TABLE = 'zuul_build'
 
 
-def upgrade():
+def upgrade(table_prefix=''):
     op.create_table(
-        BUILDSET_TABLE,
+        table_prefix + BUILDSET_TABLE,
         sa.Column('id', sa.Integer, primary_key=True),
         sa.Column('zuul_ref', sa.String(255)),
         sa.Column('pipeline', sa.String(255)),
@@ -34,10 +34,10 @@
     )
 
     op.create_table(
-        BUILD_TABLE,
+        table_prefix + BUILD_TABLE,
         sa.Column('id', sa.Integer, primary_key=True),
         sa.Column('buildset_id', sa.Integer,
-                  sa.ForeignKey(BUILDSET_TABLE + ".id")),
+                  sa.ForeignKey(table_prefix + BUILDSET_TABLE + ".id")),
         sa.Column('uuid', sa.String(36)),
         sa.Column('job_name', sa.String(255)),
         sa.Column('result', sa.String(255)),
diff --git a/zuul/driver/sql/alembic/versions/5efb477fa963_add_ref_url_column.py b/zuul/driver/sql/alembic/versions/5efb477fa963_add_ref_url_column.py
index f9c3535..5502425 100644
--- a/zuul/driver/sql/alembic/versions/5efb477fa963_add_ref_url_column.py
+++ b/zuul/driver/sql/alembic/versions/5efb477fa963_add_ref_url_column.py
@@ -30,8 +30,9 @@
 import sqlalchemy as sa
 
 
-def upgrade():
-    op.add_column('zuul_buildset', sa.Column('ref_url', sa.String(255)))
+def upgrade(table_prefix=''):
+    op.add_column(
+        table_prefix + 'zuul_buildset', sa.Column('ref_url', sa.String(255)))
 
 
 def downgrade():
diff --git a/zuul/driver/sql/alembic/versions/60c119eb1e3f_use_build_set_results.py b/zuul/driver/sql/alembic/versions/60c119eb1e3f_use_build_set_results.py
index 985eb0c..67581a6 100644
--- a/zuul/driver/sql/alembic/versions/60c119eb1e3f_use_build_set_results.py
+++ b/zuul/driver/sql/alembic/versions/60c119eb1e3f_use_build_set_results.py
@@ -18,8 +18,9 @@
 BUILDSET_TABLE = 'zuul_buildset'
 
 
-def upgrade():
-    op.add_column(BUILDSET_TABLE, sa.Column('result', sa.String(255)))
+def upgrade(table_prefix=''):
+    op.add_column(
+        table_prefix + BUILDSET_TABLE, sa.Column('result', sa.String(255)))
 
     connection = op.get_bind()
     connection.execute(
@@ -29,9 +30,9 @@
              SELECT CASE score
                 WHEN 1 THEN 'SUCCESS'
                 ELSE 'FAILURE' END)
-        """.format(buildset_table=BUILDSET_TABLE))
+        """.format(buildset_table=table_prefix + BUILDSET_TABLE))
 
-    op.drop_column(BUILDSET_TABLE, 'score')
+    op.drop_column(table_prefix + BUILDSET_TABLE, 'score')
 
 
 def downgrade():
diff --git a/zuul/driver/sql/alembic/versions/ba4cdce9b18c_add_rev_columns.py b/zuul/driver/sql/alembic/versions/ba4cdce9b18c_add_rev_columns.py
index dc75983..3e60866 100644
--- a/zuul/driver/sql/alembic/versions/ba4cdce9b18c_add_rev_columns.py
+++ b/zuul/driver/sql/alembic/versions/ba4cdce9b18c_add_rev_columns.py
@@ -16,9 +16,11 @@
 import sqlalchemy as sa
 
 
-def upgrade():
-    op.add_column('zuul_buildset', sa.Column('oldrev', sa.String(255)))
-    op.add_column('zuul_buildset', sa.Column('newrev', sa.String(255)))
+def upgrade(table_prefix=''):
+    op.add_column(
+        table_prefix + 'zuul_buildset', sa.Column('oldrev', sa.String(255)))
+    op.add_column(
+        table_prefix + 'zuul_buildset', sa.Column('newrev', sa.String(255)))
 
 
 def downgrade():
diff --git a/zuul/driver/sql/alembic/versions/f86c9871ee67_add_tenant_column.py b/zuul/driver/sql/alembic/versions/f86c9871ee67_add_tenant_column.py
index 4087af3..84fd0ef 100644
--- a/zuul/driver/sql/alembic/versions/f86c9871ee67_add_tenant_column.py
+++ b/zuul/driver/sql/alembic/versions/f86c9871ee67_add_tenant_column.py
@@ -30,8 +30,9 @@
 import sqlalchemy as sa
 
 
-def upgrade():
-    op.add_column('zuul_buildset', sa.Column('tenant', sa.String(255)))
+def upgrade(table_prefix=''):
+    op.add_column(
+        table_prefix + 'zuul_buildset', sa.Column('tenant', sa.String(255)))
 
 
 def downgrade():
diff --git a/zuul/driver/sql/sqlconnection.py b/zuul/driver/sql/sqlconnection.py
index b964c0b..285d0c2 100644
--- a/zuul/driver/sql/sqlconnection.py
+++ b/zuul/driver/sql/sqlconnection.py
@@ -15,6 +15,7 @@
 import logging
 
 import alembic
+import alembic.command
 import alembic.config
 import sqlalchemy as sa
 import sqlalchemy.pool
@@ -39,6 +40,8 @@
         self.engine = None
         self.connection = None
         self.tables_established = False
+        self.table_prefix = self.connection_config.get('table_prefix', '')
+
         try:
             self.dburi = self.connection_config.get('dburi')
             # Recycle connections if they've been idle for more than 1 second.
@@ -49,7 +52,6 @@
                 poolclass=sqlalchemy.pool.QueuePool,
                 pool_recycle=self.connection_config.get('pool_recycle', 1))
             self._migrate()
-            self._setup_tables()
             self.zuul_buildset_table, self.zuul_build_table \
                 = self._setup_tables()
             self.tables_established = True
@@ -75,14 +77,16 @@
             config.set_main_option("sqlalchemy.url",
                                    self.connection_config.get('dburi'))
 
-            alembic.command.upgrade(config, 'head')
+            # Alembic lets us add arbitrary data in the tag argument. We can
+            # leverage that to tell the upgrade scripts about the table prefix.
+            tag = {'table_prefix': self.table_prefix}
+            alembic.command.upgrade(config, 'head', tag=tag)
 
-    @staticmethod
-    def _setup_tables():
+    def _setup_tables(self):
         metadata = sa.MetaData()
 
         zuul_buildset_table = sa.Table(
-            BUILDSET_TABLE, metadata,
+            self.table_prefix + BUILDSET_TABLE, metadata,
             sa.Column('id', sa.Integer, primary_key=True),
             sa.Column('zuul_ref', sa.String(255)),
             sa.Column('pipeline', sa.String(255)),
@@ -99,10 +103,11 @@
         )
 
         zuul_build_table = sa.Table(
-            BUILD_TABLE, metadata,
+            self.table_prefix + BUILD_TABLE, metadata,
             sa.Column('id', sa.Integer, primary_key=True),
             sa.Column('buildset_id', sa.Integer,
-                      sa.ForeignKey(BUILDSET_TABLE + ".id")),
+                      sa.ForeignKey(self.table_prefix +
+                                    BUILDSET_TABLE + ".id")),
             sa.Column('uuid', sa.String(36)),
             sa.Column('job_name', sa.String(255)),
             sa.Column('result', sa.String(255)),
diff --git a/zuul/lib/fingergw.py b/zuul/lib/fingergw.py
new file mode 100644
index 0000000..c89ed0f
--- /dev/null
+++ b/zuul/lib/fingergw.py
@@ -0,0 +1,206 @@
+#!/usr/bin/env python
+# Copyright 2017 Red Hat, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain
+# a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations
+# under the License.
+
+import functools
+import logging
+import socket
+import threading
+
+import zuul.rpcclient
+
+from zuul.lib import commandsocket
+from zuul.lib import streamer_utils
+
+
+COMMANDS = ['stop']
+
+
+class RequestHandler(streamer_utils.BaseFingerRequestHandler):
+    '''
+    Class implementing the logic for handling a single finger request.
+    '''
+
+    log = logging.getLogger("zuul.fingergw")
+
+    def __init__(self, *args, **kwargs):
+        self.rpc = kwargs.pop('rpc')
+        super(RequestHandler, self).__init__(*args, **kwargs)
+
+    def _fingerClient(self, server, port, build_uuid):
+        '''
+        Open a finger connection and return all streaming results.
+
+        :param server: The remote server.
+        :param port: The remote port.
+        :param build_uuid: The build UUID to stream.
+
+        Both IPv4 and IPv6 are supported.
+        '''
+        with socket.create_connection((server, port), timeout=10) as s:
+            msg = "%s\n" % build_uuid    # Must have a trailing newline!
+            s.sendall(msg.encode('utf-8'))
+            while True:
+                data = s.recv(1024)
+                if data:
+                    self.request.sendall(data)
+                else:
+                    break
+
+    def handle(self):
+        '''
+        This method is called by the socketserver framework to handle an
+        incoming request.
+        '''
+        try:
+            build_uuid = self.getCommand()
+            port_location = self.rpc.get_job_log_stream_address(build_uuid)
+            self._fingerClient(
+                port_location['server'],
+                port_location['port'],
+                build_uuid,
+            )
+        except Exception:
+            self.log.exception('Finger request handling exception:')
+            msg = 'Internal streaming error'
+            self.request.sendall(msg.encode('utf-8'))
+            return
+
+
+class FingerGateway(object):
+    '''
+    Class implementing the finger multiplexing/gateway logic.
+
+    For each incoming finger request, a new thread is started that will
+    be responsible for finding which Zuul executor is executing the
+    requested build (by asking Gearman), forwarding the request to that
+    executor, and streaming the results back to our client.
+    '''
+
+    log = logging.getLogger("zuul.fingergw")
+
+    def __init__(self, gearman, address, user, command_socket, pid_file):
+        '''
+        Initialize the finger gateway.
+
+        :param tuple gearman: Gearman connection information. This should
+            include the server, port, SSL key, SSL cert, and SSL CA.
+        :param tuple address: The address and port to bind to for our gateway.
+        :param str user: The user to which we should drop privileges after
+            binding to our address.
+        :param str command_socket: Path to the daemon command socket.
+        :param str pid_file: Path to the daemon PID file.
+        '''
+        self.gear_server = gearman[0]
+        self.gear_port = gearman[1]
+        self.gear_ssl_key = gearman[2]
+        self.gear_ssl_cert = gearman[3]
+        self.gear_ssl_ca = gearman[4]
+        self.address = address
+        self.user = user
+        self.pid_file = pid_file
+
+        self.rpc = None
+        self.server = None
+        self.server_thread = None
+
+        self.command_thread = None
+        self.command_running = False
+        self.command_socket = command_socket
+
+        self.command_map = dict(
+            stop=self.stop,
+        )
+
+    def _runCommand(self):
+        while self.command_running:
+            try:
+                command = self.command_socket.get().decode('utf8')
+                if command != '_stop':
+                    self.command_map[command]()
+                else:
+                    return
+            except Exception:
+                self.log.exception("Exception while processing command")
+
+    def _run(self):
+        try:
+            self.server.serve_forever()
+        except Exception:
+            self.log.exception('Abnormal termination:')
+            raise
+
+    def start(self):
+        self.rpc = zuul.rpcclient.RPCClient(
+            self.gear_server,
+            self.gear_port,
+            self.gear_ssl_key,
+            self.gear_ssl_cert,
+            self.gear_ssl_ca)
+
+        self.server = streamer_utils.CustomThreadingTCPServer(
+            self.address,
+            functools.partial(RequestHandler, rpc=self.rpc),
+            user=self.user,
+            pid_file=self.pid_file)
+
+        # Start the command processor after the server and privilege drop
+        if self.command_socket:
+            self.log.debug("Starting command processor")
+            self.command_socket = commandsocket.CommandSocket(
+                self.command_socket)
+            self.command_socket.start()
+            self.command_running = True
+            self.command_thread = threading.Thread(
+                target=self._runCommand, name='command')
+            self.command_thread.daemon = True
+            self.command_thread.start()
+
+        # The socketserver shutdown() call will hang unless the call
+        # to server_forever() happens in another thread. So let's do that.
+        self.server_thread = threading.Thread(target=self._run)
+        self.server_thread.daemon = True
+        self.server_thread.start()
+        self.log.info("Finger gateway is started")
+
+    def stop(self):
+        if self.command_socket:
+            self.command_running = False
+            try:
+                self.command_socket.stop()
+            except Exception:
+                self.log.exception("Error stopping command socket:")
+
+        if self.server:
+            try:
+                self.server.shutdown()
+                self.server.server_close()
+                self.server = None
+            except Exception:
+                self.log.exception("Error stopping TCP server:")
+
+        if self.rpc:
+            try:
+                self.rpc.shutdown()
+                self.rpc = None
+            except Exception:
+                self.log.exception("Error stopping RCP client:")
+
+        self.log.info("Finger gateway is stopped")
+
+    def wait(self):
+        '''
+        Wait on the gateway to shutdown.
+        '''
+        self.server_thread.join()
diff --git a/zuul/lib/log_streamer.py b/zuul/lib/log_streamer.py
index 1906be7..5c894b4 100644
--- a/zuul/lib/log_streamer.py
+++ b/zuul/lib/log_streamer.py
@@ -18,14 +18,13 @@
 import logging
 import os
 import os.path
-import pwd
 import re
 import select
-import socket
-import socketserver
 import threading
 import time
 
+from zuul.lib import streamer_utils
+
 
 class Log(object):
 
@@ -38,7 +37,7 @@
         self.size = self.stat.st_size
 
 
-class RequestHandler(socketserver.BaseRequestHandler):
+class RequestHandler(streamer_utils.BaseFingerRequestHandler):
     '''
     Class to handle a single log streaming request.
 
@@ -46,47 +45,13 @@
     the (class/method/attribute) names were changed to protect the innocent.
     '''
 
-    MAX_REQUEST_LEN = 1024
-    REQUEST_TIMEOUT = 10
-
-    # NOTE(Shrews): We only use this to log exceptions since a new process
-    # is used per-request (and having multiple processes write to the same
-    # log file constantly is bad).
-    log = logging.getLogger("zuul.log_streamer.RequestHandler")
-
-    def get_command(self):
-        poll = select.poll()
-        bitmask = (select.POLLIN | select.POLLERR |
-                   select.POLLHUP | select.POLLNVAL)
-        poll.register(self.request, bitmask)
-        buffer = b''
-        ret = None
-        start = time.time()
-        while True:
-            elapsed = time.time() - start
-            timeout = max(self.REQUEST_TIMEOUT - elapsed, 0)
-            if not timeout:
-                raise Exception("Timeout while waiting for input")
-            for fd, event in poll.poll(timeout):
-                if event & select.POLLIN:
-                    buffer += self.request.recv(self.MAX_REQUEST_LEN)
-                else:
-                    raise Exception("Received error event")
-            if len(buffer) >= self.MAX_REQUEST_LEN:
-                raise Exception("Request too long")
-            try:
-                ret = buffer.decode('utf-8')
-                x = ret.find('\n')
-                if x > 0:
-                    return ret[:x]
-            except UnicodeDecodeError:
-                pass
+    log = logging.getLogger("zuul.log_streamer")
 
     def handle(self):
         try:
-            build_uuid = self.get_command()
+            build_uuid = self.getCommand()
         except Exception:
-            self.log.exception("Failure during get_command:")
+            self.log.exception("Failure during getCommand:")
             msg = 'Internal streaming error'
             self.request.sendall(msg.encode("utf-8"))
             return
@@ -182,59 +147,11 @@
                     return False
 
 
-class CustomThreadingTCPServer(socketserver.ThreadingTCPServer):
-    '''
-    Custom version that allows us to drop privileges after port binding.
-    '''
-    address_family = socket.AF_INET6
+class LogStreamerServer(streamer_utils.CustomThreadingTCPServer):
 
     def __init__(self, *args, **kwargs):
-        self.user = kwargs.pop('user')
         self.jobdir_root = kwargs.pop('jobdir_root')
-        # For some reason, setting custom attributes does not work if we
-        # call the base class __init__ first. Wha??
-        socketserver.ThreadingTCPServer.__init__(self, *args, **kwargs)
-
-    def change_privs(self):
-        '''
-        Drop our privileges to the zuul user.
-        '''
-        if os.getuid() != 0:
-            return
-        pw = pwd.getpwnam(self.user)
-        os.setgroups([])
-        os.setgid(pw.pw_gid)
-        os.setuid(pw.pw_uid)
-        os.umask(0o022)
-
-    def server_bind(self):
-        self.allow_reuse_address = True
-        socketserver.ThreadingTCPServer.server_bind(self)
-        if self.user:
-            self.change_privs()
-
-    def server_close(self):
-        '''
-        Overridden from base class to shutdown the socket immediately.
-        '''
-        try:
-            self.socket.shutdown(socket.SHUT_RD)
-            self.socket.close()
-        except socket.error as e:
-            # If it's already closed, don't error.
-            if e.errno == socket.EBADF:
-                return
-            raise
-
-    def process_request(self, request, client_address):
-        '''
-        Overridden from the base class to name the thread.
-        '''
-        t = threading.Thread(target=self.process_request_thread,
-                             name='FingerStreamer',
-                             args=(request, client_address))
-        t.daemon = self.daemon_threads
-        t.start()
+        super(LogStreamerServer, self).__init__(*args, **kwargs)
 
 
 class LogStreamer(object):
@@ -243,12 +160,12 @@
     '''
 
     def __init__(self, user, host, port, jobdir_root):
-        self.log = logging.getLogger('zuul.lib.LogStreamer')
+        self.log = logging.getLogger('zuul.log_streamer')
         self.log.debug("LogStreamer starting on port %s", port)
-        self.server = CustomThreadingTCPServer((host, port),
-                                               RequestHandler,
-                                               user=user,
-                                               jobdir_root=jobdir_root)
+        self.server = LogStreamerServer((host, port),
+                                        RequestHandler,
+                                        user=user,
+                                        jobdir_root=jobdir_root)
 
         # We start the actual serving within a thread so we can return to
         # the owner.
diff --git a/zuul/lib/streamer_utils.py b/zuul/lib/streamer_utils.py
new file mode 100644
index 0000000..985f3c3
--- /dev/null
+++ b/zuul/lib/streamer_utils.py
@@ -0,0 +1,130 @@
+#!/usr/bin/env python
+# Copyright 2017 Red Hat, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain
+# a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations
+# under the License.
+
+'''
+This file contains code common to finger log streaming functionality.
+The log streamer process within each executor, the finger gateway service,
+and the web interface will all make use of this module.
+'''
+
+import os
+import pwd
+import select
+import socket
+import socketserver
+import threading
+import time
+
+
+class BaseFingerRequestHandler(socketserver.BaseRequestHandler):
+    '''
+    Base class for common methods for handling finger requests.
+    '''
+
+    MAX_REQUEST_LEN = 1024
+    REQUEST_TIMEOUT = 10
+
+    def getCommand(self):
+        poll = select.poll()
+        bitmask = (select.POLLIN | select.POLLERR |
+                   select.POLLHUP | select.POLLNVAL)
+        poll.register(self.request, bitmask)
+        buffer = b''
+        ret = None
+        start = time.time()
+        while True:
+            elapsed = time.time() - start
+            timeout = max(self.REQUEST_TIMEOUT - elapsed, 0)
+            if not timeout:
+                raise Exception("Timeout while waiting for input")
+            for fd, event in poll.poll(timeout):
+                if event & select.POLLIN:
+                    buffer += self.request.recv(self.MAX_REQUEST_LEN)
+                else:
+                    raise Exception("Received error event")
+            if len(buffer) >= self.MAX_REQUEST_LEN:
+                raise Exception("Request too long")
+            try:
+                ret = buffer.decode('utf-8')
+                x = ret.find('\n')
+                if x > 0:
+                    return ret[:x]
+            except UnicodeDecodeError:
+                pass
+
+
+class CustomThreadingTCPServer(socketserver.ThreadingTCPServer):
+    '''
+    Custom version that allows us to drop privileges after port binding.
+    '''
+
+    address_family = socket.AF_INET6
+
+    def __init__(self, *args, **kwargs):
+        self.user = kwargs.pop('user')
+        self.pid_file = kwargs.pop('pid_file', None)
+        socketserver.ThreadingTCPServer.__init__(self, *args, **kwargs)
+
+    def change_privs(self):
+        '''
+        Drop our privileges to another user.
+        '''
+        if os.getuid() != 0:
+            return
+
+        pw = pwd.getpwnam(self.user)
+
+        # Change owner on our pid file so it can be removed by us after
+        # dropping privileges. May not exist if not a daemon.
+        if self.pid_file and os.path.exists(self.pid_file):
+            os.chown(self.pid_file, pw.pw_uid, pw.pw_gid)
+
+        os.setgroups([])
+        os.setgid(pw.pw_gid)
+        os.setuid(pw.pw_uid)
+        os.umask(0o022)
+
+    def server_bind(self):
+        '''
+        Overridden from the base class to allow address reuse and to drop
+        privileges after binding to the listening socket.
+        '''
+        self.allow_reuse_address = True
+        socketserver.ThreadingTCPServer.server_bind(self)
+        if self.user:
+            self.change_privs()
+
+    def server_close(self):
+        '''
+        Overridden from base class to shutdown the socket immediately.
+        '''
+        try:
+            self.socket.shutdown(socket.SHUT_RD)
+            self.socket.close()
+        except socket.error as e:
+            # If it's already closed, don't error.
+            if e.errno == socket.EBADF:
+                return
+            raise
+
+    def process_request(self, request, client_address):
+        '''
+        Overridden from the base class to name the thread.
+        '''
+        t = threading.Thread(target=self.process_request_thread,
+                             name='socketserver_Thread',
+                             args=(request, client_address))
+        t.daemon = self.daemon_threads
+        t.start()
diff --git a/zuul/model.py b/zuul/model.py
index 56d08a1..e53a357 100644
--- a/zuul/model.py
+++ b/zuul/model.py
@@ -2443,6 +2443,8 @@
 class Layout(object):
     """Holds all of the Pipelines."""
 
+    log = logging.getLogger("zuul.layout")
+
     def __init__(self, tenant):
         self.uuid = uuid4().hex
         self.tenant = tenant
@@ -2553,7 +2555,11 @@
         matched = False
         for variant in self.getJobs(jobname):
             if not variant.changeMatches(change):
+                self.log.debug("Variant %s did not match %s", repr(variant),
+                               change)
                 continue
+            else:
+                self.log.debug("Variant %s matched %s", repr(variant), change)
             if not variant.isBase():
                 parent = variant.parent
                 if not jobs and parent is None:
@@ -2576,9 +2582,12 @@
         for jobname in job_list.jobs:
             # This is the final job we are constructing
             frozen_job = None
+            self.log.debug("Collecting jobs %s for %s", jobname, change)
             try:
                 variants = self.collectJobs(jobname, change)
             except NoMatchingParentError:
+                self.log.debug("No matching parents for job %s and change %s",
+                               jobname, change)
                 variants = None
             if not variants:
                 # A change must match at least one defined job variant
@@ -2600,6 +2609,11 @@
                 if variant.changeMatches(change):
                     frozen_job.applyVariant(variant)
                     matched = True
+                    self.log.debug("Pipeline variant %s matched %s",
+                                   repr(variant), change)
+            else:
+                self.log.debug("Pipeline variant %s did not match %s",
+                               repr(variant), change)
             if not matched:
                 # A change must match at least one project pipeline
                 # job variant.
diff --git a/zuul/web/__init__.py b/zuul/web/__init__.py
index 795103d..cb9993e 100755
--- a/zuul/web/__init__.py
+++ b/zuul/web/__init__.py
@@ -42,17 +42,6 @@
     def setEventLoop(self, event_loop):
         self.event_loop = event_loop
 
-    def _getPortLocation(self, job_uuid):
-        """
-        Query Gearman for the executor running the given job.
-
-        :param str job_uuid: The job UUID we want to stream.
-        """
-        # TODO: Fetch the entire list of uuid/file/server/ports once and
-        #       share that, and fetch a new list on cache misses perhaps?
-        ret = self.rpc.get_job_log_stream_address(job_uuid)
-        return ret
-
     async def _fingerClient(self, ws, server, port, job_uuid):
         """
         Create a client to connect to the finger streamer and pull results.
@@ -94,7 +83,10 @@
 
         # Schedule the blocking gearman work in an Executor
         gear_task = self.event_loop.run_in_executor(
-            None, self._getPortLocation, request['uuid'])
+            None,
+            self.rpc.get_job_log_stream_address,
+            request['uuid'],
+        )
 
         try:
             port_location = await asyncio.wait_for(gear_task, 10)
diff --git a/zuul/web/static/builds.html b/zuul/web/static/builds.html
index 921c9e2..5b9ba35 100644
--- a/zuul/web/static/builds.html
+++ b/zuul/web/static/builds.html
@@ -17,10 +17,10 @@
 <html>
 <head>
     <title>Zuul Builds</title>
-    <link rel="stylesheet" href="/static/bootstrap/css/bootstrap.min.css">
+    <link rel="stylesheet" href="../static/bootstrap/css/bootstrap.min.css">
     <link rel="stylesheet" href="../static/styles/zuul.css" />
-    <script src="/static/js/jquery.min.js"></script>
-    <script src="/static/js/angular.min.js"></script>
+    <script src="../static/js/jquery.min.js"></script>
+    <script src="../static/js/angular.min.js"></script>
     <script src="../static/javascripts/zuul.angular.js"></script>
 </head>
 <body ng-app="zuulBuilds" ng-controller="mainController"><div class="container-fluid">
@@ -55,12 +55,9 @@
         <th>Project</th>
         <th>Pipeline</th>
         <th>Change</th>
-        <th>Newrev</th>
         <th>Duration</th>
         <th>Log url</th>
-        <th>Node name</th>
         <th>Start time</th>
-        <th>End time</th>
         <th>Result</th>
       </tr>
     </thead>
@@ -71,12 +68,9 @@
         <td>{{ build.project }}</td>
         <td>{{ build.pipeline }}</td>
         <td><a href="{{ build.ref_url }}" target="_self">change</a></td>
-        <td>{{ build.newrev }}</td>
         <td>{{ build.duration }} seconds</td>
         <td><a ng-if="build.log_url" href="{{ build.log_url }}" target="_self">logs</a></td>
-        <td>{{ build.node_name }}</td>
         <td>{{ build.start_time }}</td>
-        <td>{{ build.end_time }}</td>
         <td>{{ build.result }}</td>
       </tr>
     </tbody>
diff --git a/zuul/web/static/index.html b/zuul/web/static/index.html
index 6747e66..d20a1ea 100644
--- a/zuul/web/static/index.html
+++ b/zuul/web/static/index.html
@@ -17,10 +17,10 @@
 <html>
 <head>
     <title>Zuul Tenants</title>
-    <link rel="stylesheet" href="/static/bootstrap/css/bootstrap.min.css">
+    <link rel="stylesheet" href="static/bootstrap/css/bootstrap.min.css">
     <link rel="stylesheet" href="static/styles/zuul.css" />
-    <script src="/static/js/jquery.min.js"></script>
-    <script src="/static/js/angular.min.js"></script>
+    <script src="static/js/jquery.min.js"></script>
+    <script src="static/js/angular.min.js"></script>
     <script src="static/javascripts/zuul.angular.js"></script>
 </head>
 <body ng-app="zuulTenants" ng-controller="mainController"><div class="container-fluid">
diff --git a/zuul/web/static/javascripts/zuul.app.js b/zuul/web/static/javascripts/zuul.app.js
index 7ceb2dd..bf90a4d 100644
--- a/zuul/web/static/javascripts/zuul.app.js
+++ b/zuul/web/static/javascripts/zuul.app.js
@@ -28,8 +28,6 @@
 function zuul_build_dom($, container) {
     // Build a default-looking DOM
     var default_layout = '<div class="container">'
-        + '<h1>Zuul Status</h1>'
-        + '<p>Real-time status monitor of Zuul, the pipeline manager between Gerrit and Workers.</p>'
         + '<div class="zuul-container" id="zuul-container">'
         + '<div style="display: none;" class="alert" id="zuul_msg"></div>'
         + '<button class="btn pull-right zuul-spinner">updating <span class="glyphicon glyphicon-refresh"></span></button>'
diff --git a/zuul/web/static/jobs.html b/zuul/web/static/jobs.html
index 6946723..b27d882 100644
--- a/zuul/web/static/jobs.html
+++ b/zuul/web/static/jobs.html
@@ -17,10 +17,10 @@
 <html>
 <head>
     <title>Zuul Builds</title>
-    <link rel="stylesheet" href="/static/bootstrap/css/bootstrap.min.css">
+    <link rel="stylesheet" href="../static/bootstrap/css/bootstrap.min.css">
     <link rel="stylesheet" href="../static/styles/zuul.css" />
-    <script src="/static/js/jquery.min.js"></script>
-    <script src="/static/js/angular.min.js"></script>
+    <script src="../static/js/jquery.min.js"></script>
+    <script src="../static/js/angular.min.js"></script>
     <script src="../static/javascripts/zuul.angular.js"></script>
 </head>
 <body ng-app="zuulJobs" ng-controller="mainController"><div class="container-fluid">
diff --git a/zuul/web/static/status.html b/zuul/web/static/status.html
index 7cb9536..8471fd1 100644
--- a/zuul/web/static/status.html
+++ b/zuul/web/static/status.html
@@ -19,11 +19,11 @@
 <html>
 <head>
   <title>Zuul Status</title>
-  <link rel="stylesheet" href="/static/bootstrap/css/bootstrap.min.css">
+  <link rel="stylesheet" href="../static/bootstrap/css/bootstrap.min.css">
   <link rel="stylesheet" href="../static/styles/zuul.css" />
-  <script src="/static/js/jquery.min.js"></script>
-  <script src="/static/js/jquery-visibility.min.js"></script>
-  <script src="/static/js/jquery.graphite.min.js"></script>
+  <script src="../static/js/jquery.min.js"></script>
+  <script src="../static/js/jquery-visibility.min.js"></script>
+  <script src="../static/js/jquery.graphite.min.js"></script>
   <script src="../static/javascripts/jquery.zuul.js"></script>
   <script src="../static/javascripts/zuul.app.js"></script>
 </head>