/**
 * @page transition Transition Manual (1.x -> 2.0)
 *
 * [TOC]
 *
 * Rewriting libyang codebase and creating libyang version 2.0 was motivated mainly by improving long term maintainability.
 * Especially some of the features and design decisions become killers for further development and maintaining the libyang
 * codebase. On the other hand, most of the principles introduced in libyang 1.x to handle YANG schemas and manipulate
 * instantiated data have proved successful. Therefore, we have decided to keep the basic mechanisms from version 1.x and
 * remove the problematic features and modify the improper design decisions. Despite the vision to keep with the mechanisms
 * also the API, the new version became a great opportunity to clean up the API and improve its usability mainly by unifying
 * how the libyang functions are used. So, in the end, this manual is not just a description of the removed features listing
 * removed, modified or added functions. The API should be even better prepared for adding new features and functions.
 * Shortly, almost everything has changed at least a little, so you cannot move from version 1.x to 2.0 just by replacing
 * code snippets. However, we believe that the change is good and libyang 2.0 is simply better.
 *
 * In this Manual, we want to introduce the differences between libyang 1.x and 2.0. It is intended for the transition
 * from 1.x to 2.0, so if you are new to libyang, simply go to the @ref howto section, this Manual is not for you.
 *
 * The complete generated list of changes (without any additional notes) can be found in
 * <a href="../compat_report.html">the compatibility report</a>.
 *
 * @section transitionGeneral General Changes
 *
 *
 * @subsection transitionGeneralErros Errors Handling
 *
 * The most visible change is probably the changed approach to handling errors. While libyang 1.x was using variable
 * *ly_errno* to provide error information in case the called function failed, there is no such variable in libyang 2.0.
 * On the other hand, most API functions now return ::LY_ERR values directly stating the result. In addition, in case
 * the error is somehow connected with the [context](@ref howtoContext), more detailed error information can be obtained
 * from the context handler itself. Mainly this change is responsible for the backward incompatibility of almost all
 * functions between versions 1.x and 2.0.
 *
 * Here is the overview of the changed / removed / added functions connected with errors and logging.
 *
 * libyang 1.x               | libyang 2.0                          | Notes
 * :-------------------------|:-------------------------------------|:-------------------------------------------------------
 * -                         | ::ly_err_last()                      | New API for handling errors.
 * -                         | ::ly_errcode()                       | ^
 * ly_verb_dbg()             | ::ly_log_dbg_groups()                | Rename to align with the names of the accepted values.
 * ly_verb()                 | ::ly_log_level()                     | ^
 *
 * More information about error handling in libyang 2.0 can be found at @ref howtoErrors page.
 *
 * @subsection transitionGeneralInOut Input / Output Processing
 *
 * libyang 2.0 introduces input (::ly_in) and output (::ly_out) handlers covering the specific input sources for parsers and
 * output targets for printers. They are supposed mainly to simplify parser's and printer's API to avoid the need for
 * separate functions for each source/target. The handlers can be used repeatedly to split the inputs or join the outputs.
 *
 * More information can be found at @ref howtoInput and @ref howtoOutput pages.
 *
 *
 * @subsection transitionGeneralOutputFormatting Output Formatting
 *
 * In libyang 1.x, there was an inconsistency in printing schemas and data. While the schemas were always printed formatted,
 * the data were printed by default without additional indentation. It is clearly visible in the YIN format of the schema,
 * which is XML, and the XML encoding of the data. While there was a possibility to format data output with the LYP_FORMAT
 * flag, it wasn't possible to change schema output formatting.
 *
 * libyang 2.0 unifies the behavior of all printers. By default, all the output formats are formatted now. Both, the data as
 * well as the schema printers, accept the option to remove additional formatting (different for the specific format, usually
 * indentations and blank lines): ::LYD_PRINT_SHRINK for the data printer and ::LYS_PRINT_SHRINK for the schema printer.
 *
 *
 * @subsection transitionGeneralXPath Addressing
 *
 * If you compare the @ref howtoXPath page from libyang 1.x and 2.0 documentation, you will be probably confused since they
 * seem very different. In fact, we have tried to simplify the API by removing the original Schema path format from the
 * public API. Since this format is used in YANG format, libyang still supports it internally, but it is not possible to use
 * it anywhere in the API. The new formats XPath and Path, mentioned at the @ref howtoXPath page, are both the Data paths
 * used in libyang 1.x. The Path format is a subset of XPath format limited to refer to a single node.
 *
 * This change was reflected in functions serving to get a node based on the specified path. Unfortunately, when comparing
 * old and new API, the transition can be confusing since the names are sometimes overloaded (be careful mainly of
 * ::lys_find_path()). The following table depicts the changes, but probably a better approach is to handle the functions as
 * a completely new API.
 *
 * libyang 1.x               | libyang 2.0                          | Notes
 * :-------------------------|:-------------------------------------|:-------------------------------------------------------
 * ly_ctx_find_path()        | -                                    | To simplify the different [types of paths](@ref howtoXPath), the Schema path format is not supported for now. If there will be use cases for it, it can be re-added later, but for now try using ::lys_find_xpath().
 * %lys_find_path()          | -                                    | To simplify the different [types of paths](@ref howtoXPath), the Schema path format is not supported for now. If there will be use cases for it, it can be re-added later, but for now try using ::lys_find_xpath().
 * ly_ctx_get_node()         | ::lys_find_path()                    | Renamed to unify API functions, note that there was lys_find_path in libyang 1.x with different functionality in comparison to the function of the same name from libyang 2.0.
 * -                         | ::lys_find_path_atoms()              | Extension of ::lys_find_path().
 * -                         | ::lys_find_lypath_atoms()            | ^
 * -                         | ::lys_find_xpath()                   | New function reflecting updated @ref howtoXPath\.
 * lys_xpath_atomize()       | ::lys_find_xpath_atoms()             | Rename to unify with the new API, extends ::lys_find_xpath().
 * -                         | ::lys_find_expr_atoms()              | Extension of ::lys_find_xpath().
 * %lyd_path()               | ::lyd_path()                         | Same purpose, just extended functionality.
 * lyd_find_path()           | ::lyd_find_xpath()                   | Rename to unify with the new API.
 * -                         | ::lyd_find_path()                    | Simplified version of ::lyd_find_path().
 * -                         | ::lyxp_get_expr()                    | Added functionality due to the changed representation of XPath expressions.
 * ly_path_data2schema()     | -                                    | Removed since the schema path is not available in API.
 * ly_path_xml2json()        | -                                    | Removed since done internally, note that even the generic XML parser is not available now.
 * lys_node_xpath_atomize()  | -                                    | Removed as useless/redundant, use ::lys_find_xpath_atoms().
 *
 * @section transitionContext Context
 *
 * Context, as a concept of a storage interconnecting YANG modules into a YANG schema and YANG schema with the instantiated
 * data, was preserved. However, it is now more supposed to be prepared just once before connecting it with any instantiated
 * data. The possibility of removing YANG modules from the context was completely dropped. Furthermore, we would like to
 * introduce some kind of context lock to completely abandon any change of the YANG modules after starting work with the
 * instantiated data.
 *
 * Other significant changes connected with the context are depicted in the following table.
 *
 * libyang 1.x               | libyang 2.0                          | Notes
 * :-------------------------|:-------------------------------------|:-------------------------------------------------------
 * ly_ctx_clean()            | -                                    | Removed functionality of manipulating with the context and the modules already placed in the context.
 * ly_ctx_remove_module()    | -                                    | ^
 * ly_ctx_set_module_data_clb() and the associated ly_module_data_clb type. | - | ^
 * ly_ctx_get_disabled_module() and the associated ly_ctx_get_disabled_module_iter() | - | ^
 * ly_ctx_info()             | ::ly_ctx_get_yanglib_data()          | Clarification of what to expect as the output of the function.
 * -                         | ::ly_ctx_get_yanglib_id ()           | Supplement functionality for ::ly_ctx_get_yanglib_data().
 * ly_ctx_new_ylmem()        | TBD                                  | Not yet implemented feature.
 * ly_ctx_new_ylpath()       | TBD                                  | ^
 * -                         | ::ly_ctx_unset_searchdir_last()      | Extend the functionality of the ::ly_ctx_unset_searchdir() to make its use easier.
 * ly_ctx_get_module_older() | -                                    | Removed functionality.
 * -                         | ::ly_ctx_get_module_implemented()    | Supplement for ::ly_ctx_get_module()
 * -                         | ::ly_ctx_get_module_latest()         | ^
 * -                         | ::ly_ctx_get_module_implemented_ns() | Supplement for ::ly_ctx_get_module_ns()
 * -                         | ::ly_ctx_get_module_latest_ns()      | ^
 * -                         | ::ly_ctx_get_submodule_latest()      | Supplement for ::ly_ctx_get_submodule()
 * -                         | ::ly_ctx_get_submodule2_latest()     | Supplement for ::ly_ctx_get_submodule2()
 * ly_ctx_get_module_by_ns() | ::ly_ctx_get_module_ns ()            | Redesign the API - replace some of the parameters with standalone supplement functions.
 * -                         | ::ly_ctx_reset_latests()             | The new functionality of maintaining the latest module revision flag.
 * ly_ctx_unset_searchdirs() | ::ly_ctx_unset_searchdir()           | Simplify API and instead of index numbers, work with the values themselves.
 * ly_ctx_set*()             | ::ly_ctx_set_options()               | API simplification.
 * ly_ctx_unset*()           | ::ly_ctx_unset_options()             | ^
 *
 *
 * @section transitionSchemas YANG Modules (Schema)
 *
 * The most significant change between libyang 1.x and 2.0 can be found in schema structures. The schema tree now has two
 * different forms - parsed and compiled trees. While the parsed tree reflects the source of the YANG module, the compiled
 * tree represents the final tree used to validate the instantiated data. Both formats can be found inside the covering
 * ::lys_module structure. More about the new structures can be found at @ref howtoSchema page.
 *
 * This is an essential change allowing speed up and simplification of data validation, but requiring carefully determine
 * which format is more suitable for the specific use case. As mentioned, the compiled trees are better for data validation
 * and getting information about the intentioned structure of the schema with all the applied groupings, type modifications,
 * augments, deviations, and any defined if-features. On the other hand, the parsed trees are useful for the schema format conversions since they
 * provide the original structure of the modules. There is a number of new functions intended to work only with the
 * parsed or the compiled tree. These functions are prefixed with `lysp_` and `lysp_` prefixes.
 *
 * Schema parser, as well as printer functions, are now extended to accept new
 * [input / output handlers](@ref transitionGeneralInOut). The previous API working directly with inputs and outputs is
 * preserved (or slightly changed), but the functions can be limited in the functionality of the new API. More information
 * can be found at @ref howtoSchemaParsers and @ref howtoSchemaPrinters pages.
 *
 * libyang 1.x                  | libyang 2.0                     | Notes
 * :----------------------------|:--------------------------------|:---------------------------------------------------------
 * -                            | ::lys_parse()                   | New generic schema parser API using [generic input handler](@ref howtoInput).
 * -                            | ::lys_print_module()            | New generic schema printer API using [generic output handler](@ref howtoOutput).
 * -                            | ::lys_print_node()              | ^
 * -                            | ::lys_print_submodule()         | ^
 *
 *
 * The following table introduces other significant changes in the API functions connected with the schema.
 *
 * libyang 1.x                  | libyang 2.0                     | Notes
 * :----------------------------|:--------------------------------|:---------------------------------------------------------
 * lys_set_private()            | -                               | Not needed, all ::lysc_node compatible structures have this pointer so it can be accessed directly.
 * lys_is_disabled()            | -                               | Make no sense since the nodes disabled by if-feature are not present in the compiled tree.
 * lys_features_list()          | -                               | Not needed, the list of features is available in the parsed tree of the module and submodule.
 * lys_features_enable(), lys_features_enable_force() | ::lys_set_implemented()         | Set of enabled features can be changed but it causes the whole context (all the modules) to recompile.
 * lys_features_disable(), lys_features_disable_force() | -       | ^
 * lys_features_state()         | -                               | Redesign of the features handling in the schema tree, the feature's status is newly directly visible as ::LYS_FENABLED flag (in parsed feature structure).
 * -                            | ::lys_feature_value()           | Simplified API to get feature's state only based on a feature name string.
 * -                            | ::lysp_feature_next()           | After redesigning features handling, this function helps to iterate over all features connected with the module.
 * lys_iffeature_value()        | ::lysc_iffeature_value()        | Renamed, but note that after features handling redesign, the compiled if-feature structure to evaluate is only in ::lysp_feature.iffeatures_c.
 * lys_iffeature_value()        | -                               | Not needed since the if-feature statements are directly applied onto the compiled tree.
 * lys_is_disabled()            | -                               | ^
 * lys_parent()                 | -                               | The compiled tree is more straightforward without the need to take care of nodes added via augments.
 * lys_main_module()            | -                               | The compiled tree does not include submodules, so there is always only the main module.
 * lys_node_module()            | -                               | ^
 * lys_set_enabled()            | -                               | It is not possible to change context this way (remove or disable modules).
 * lys_set_disabled()           | -                               | ^
 * -                            | ::lys_find_child()              | Helpers wrapper around ::lys_getnext().
 * -                            | ::lys_getnext_ext()             | Alternative to ::lys_getnext() allowing processing schema trees inside extension instances.
 * -                            | ::lys_nodetype2str()            | New functionality.
 * -                            | ::lys_value_validate()          | Supplement functionality to ::lyd_value_validate().
 * lys_is_key()                 | ::lysc_is_key()                 | Renamed to connect with the compiled schema tree.
 * -                            | ::lysc_is_userordered()         | Added functionality to simplify the examination of generic compiled schema nodes.
 * -                            | ::lysc_is_np_cont()             | ^
 * -                            | ::lysc_node_child()             | ^
 * -                            | ::lysc_node_actions()           | ^
 * -                            | ::lysc_node_notifs()            | ^
 * -                            | ::lysp_node_child()             | Added functionality to simplify the examination of generic parsed schema nodes.
 * -                            | ::lysp_node_actions()           | ^
 * -                            | ::lysp_node_notifs()            | ^
 * -                            | ::lysp_node_groupings()         | ^
 * -                            | ::lysp_node_typedefs()          | ^
 * -                            | ::lysc_tree_dfs_full()          | Alternative DFS passing implementation to ::LYSC_TREE_DFS_BEGIN macro.
 * -                            | ::lysc_module_dfs_full()        | Supplement functionality to ::lysc_tree_dfs_full().
 * lys_path(), lys_data_path()  | ::lysc_path()                   | Redesigned functionality.
 * lys_data_path_pattern()      | -                               | Removed as useless
 * lys_implemented_module()     | ::ly_ctx_get_module_implemented() | Removed, the same result can be simply achieved using ::ly_ctx_get_module_implemented().
 *
 * There is a set of functions available to implement data type plugins for storing and manipulating data values in a more
 * natural way to the specific data type. For example, IPv4 address type is defined as a string with a pattern, but it is
 * more effective and usual to store and handle IPv4 as a 32-bit number.
 *
 * libyang 1.x                  | libyang 2.0                     | Notes
 * :----------------------------|:--------------------------------|:---------------------------------------------------------
 * lys_getnext_union_type()     | -                               | Removed after the type representation redesign.
 * -                            | ::ly_type_identity_isderived()  | Helper functions for base types.
 * -                            | ::ly_type_parse_dec64()         | ^
 * -                            | ::ly_type_parse_int()           | ^
 * -                            | ::ly_type_parse_uint()          | ^
 * -                            | ::ly_type_validate_patterns()   | ^
 * -                            | ::ly_type_validate_range()      | ^
 * -                            | ::ly_type_print_get_prefix()    | Helper functions for processing prefixes in data values.
 * -                            | ::ly_type_store_resolve_prefix() | ^
 * -                            | ::lysc_prefixes_compile()       | ^
 * -                            | ::lysc_prefixes_dup()           | ^
 * -                            | ::lysc_prefixes_free()          | ^
 *
 *
 * Extension implementation is not yet finished. The related functions (lys_ext_*()) from libyang 1.x are not currently
 * available and all the API changes will be described later. The same situation is with plugins handling. The API is not
 * yet ready. Despite the readiness of the data type plugins, support for loading them from external objects is not yet
 * supported.
 *
 *
 * libyang 1.x                  | libyang 2.0                     | Notes
 * :----------------------------|:--------------------------------|:---------------------------------------------------------
 * lys_ext_complex_get_substmt() | TBD                            | Not yet implemented feature.
 * lys_ext_instance_presence()  | TBD                             | ^
 * lys_ext_instance_substmt()   | TBD                             | ^
 * ly_clean_plugins()           | TBD                             | ^
 * ly_get_loaded_plugins()      | TBD                             | ^
 * ly_load_plugins()            | TBD                             | ^
 * ly_register_exts()           | TBD                             | ^
 * ly_register_types()          | TBD                             | ^
 *
 *
 * @section transitionData Data Instances
 *
 * Conceptually, the data tree did not change as much as the schema tree. There is still a generic ::lyd_node structure that
 * maps according to the schema node's nodetype to some of the other lyd_node_* structures. All the data nodes were extended
 * by hashes to improve performance when searching and processing data trees. The hashes are used for example in the
 * lyd_find_* functions.
 *
 * All the data nodes are also implicitly ordered following the order of the schema nodes. This is the
 * reason to change the insertion function. Only the user-ordered lists and leaf-lists can be now placed relative to other
 * instances of the same list/leaf-list. Otherwise, the data instance is always inserted/created at the correct place beside
 * the right sibling nodes.
 *
 * For any functions that are available on inputs of different scale (node, subtree, all siblings, whole data tree),
 * there are several variants of the specific function with suffix specifying what exactly the processed input will be
 * (_single, _tree, _siblings, _all). This way the behavior is always clear in the code.
 *
 * libyang 1.x                  | libyang 2.0                     | Notes
 * :----------------------------|:--------------------------------|:---------------------------------------------------------
 * %lyd_insert_after()          | ::lyd_insert_after()            | Changed meaning by limiting applicability only to user-ordered list and leaf-list instances.
 * %lyd_insert_before()         | ::lyd_insert_before()           | ^
 * lyd_schema_sort()            | -                               | Not necessary since the nodes are sorted implicitly.
 *
 *
 * Parsing data instances in XML format is newly done directly, without any interstep. Therefore, complete XML API
 * (lyxml_*() functions) from libyang 1.x was removed.
 *
 * Parser's API was simplified to avoid variadic parameters. The functions are newly split to parsed data, notifications,
 * RPCs and replies to the RPCs. Similarly to the schema parsers, also the new data parser API works with
 * [input handlers](@ref transitionGeneralInOut). The data printer's API was also extended to use new
 * [output handlers](@ref transitionGeneralInOut). However, part of the previous API working directly with inputs
 * and outputs was preserved. More information about the data parser and printer can be found at
 * @ref howtoDataParsers and @ref howtoDataPrinters pages.
 *
 * libyang 1.x                  | libyang 2.0                     | Notes
 * :----------------------------|:--------------------------------|:---------------------------------------------------------
 * -                            | ::lyd_parse_data()              | Redesigned data tree parser.
 * lyd_parse_xml()              | -                               | XML tree format was removed.
 * lyd_parse_fd()               | ::lyd_parse_data_fd()           | Renamed and limited to data trees only.
 * lyd_parse_mem()              | ::lyd_parse_data_mem()          | ^
 * lyd_parse_path()             | ::lyd_parse_data_path()         | ^
 * -                            | ::lyd_parse_ext_data()          | Separated function for parsing data trees matching a schema tree of the given extension instance.
 * -                            | ::lyd_parse_op()                | Separated function for parsing RPCs, actions, replies, and notifications.
 * -                            | ::lyd_parse_ext_op()            | Separated function for parsing RPCs, actions, replies, and notifications of the given extension instance.
 * -                            | ::lyd_print_all()               | New API accepting ::ly_out.
 * -                            | ::lyd_print_tree()              | ^
 *
 *
 * Data validation is still done as part of the parser's process. The standalone functionality is available to check the
 * result of data manipulation with the values of the terminal nodes or with the structure of the data tree. In contrast to
 * libyang 1.x, adding the default nodes was made available as a standalone function to simplify the data manipulation
 * process before the final validation.
 *
 * Many validation flags were removed because they became obsolete (LYD_OPT_DESTRUCT, LYD_OPT_WHENAUTODEL,
 * LYD_OPT_NOEXTDEPS, LYD_OPT_DATA_NO_YANGLIB, LYD_OPT_VAL_DIFF) or we consider them redundant (LYD_OPT_OBSOLETE,
 * LYD_OPT_NOSIBLINGS, LYD_OPT_DATA_ADD_YANGLIB). As for LYD_OPT_TRUSTED, this option was mostly replaced with
 * ::LYD_PARSE_ONLY because both skip validation but with the significant difference that LYD_OPT_TRUSTED also sets
 * the data node flags to be considered validated. The current option ::LYD_PARSE_ONLY does not do this because
 * there is now much better support for working with non-validated data trees. Also, in case an invalid tree was marked
 * as validated, it could lead to some undesired behavior, which is now avoided.
 *
 * Worth mentioning is a difference in the LYB format, which now also stores its validation flags. So, in case
 * a validated data tree is stored, it is also loaded as validated.
 *
 * libyang 1.x                  | libyang 2.0                     | Notes
 * :----------------------------|:--------------------------------|:---------------------------------------------------------
 * lyd_validate()               | ::lyd_validate_all(), ::lyd_validate_op() | Redesigned functionality.
 * lyd_validate_modules()       | ::lyd_validate_module()         | ^
 * lyd_validate_value(), lyd_value_type() | ::lyd_value_validate()          | Redesigned functionality.
 * -                            | ::lyd_new_implicit_all()        | New in API to explicitly add default nodes, previously done only as part of the validation process.
 * -                            | ::lyd_new_implicit_module()     | Supplement functionality to ::lyd_new_implicit_all().
 * -                            | ::lyd_new_implicit_tree()       | ^
 *
 *
 * The `diff` functionality was completely redesigned. Instead of the array of operations to transform one tree into another,
 * the difference between two data trees has newly a form of the annotated data tree describing the differences. A number of
 * functions to use the diff tree was added into API. To simply compare just nodes, there are the `compare` functions.
 *
 * libyang 1.x                  | libyang 2.0                     | Notes
 * :----------------------------|:--------------------------------|:---------------------------------------------------------
 * lyd_diff()                   | ::lyd_diff_tree()               | Redesigned functionality.
 * -                            | ::lyd_diff_siblings()           | Supplement functionality to ::lyd_diff_tree().
 * -                            | ::lyd_diff_apply_all()          | ^
 * -                            | ::lyd_diff_apply_module()       | ^
 * -                            | ::lyd_diff_merge_all()          | ^
 * -                            | ::lyd_diff_merge_module()       | ^
 * -                            | ::lyd_diff_merge_tree()         | ^
 * -                            | ::lyd_diff_reverse_all()        | ^
 * lyd_free_diff()              | -                               | Removed.
 * lyd_free_val_diff()          | -                               | Removed.
 * -                            | ::lyd_compare_single()          | Added functionality.
 * -                            | ::lyd_compare_meta()            | Supplement functionality to ::lyd_compare_single()
 * -                            | ::lyd_compare_siblings()        | ^
 *
 *
 * For now, the functionality of moving data between two different contexts is not implemented. If you have a real use case
 * for this functionality, let us know.
 *
 * libyang 1.x                  | libyang 2.0                     | Notes
 * :----------------------------|:--------------------------------|:---------------------------------------------------------
 * lyd_dup()                    | ::lyd_dup_single()              | Redesigned functionality.
 * lyd_dup_withsiblings()       | ::lyd_dup_siblings()            | ^
 * -                            | ::lyd_dup_meta_single()         | Supplement functionality to ::lyd_dup_single().
 * lyd_dup_to_ctx()             | -                               | Transferring data from one context to another is not supported.
 * lyd_merge()                  | ::lyd_merge_tree()              | Renamed.
 * -                            | ::lyd_merge_siblings()          | Supplement functionality to ::lyd_merge_tree()
 * lyd_merge_to_ctx()           | -                               | Transferring data from one context to another is not supported.
 *
 *
 * There is a significant change in the value structure in terminal nodes. Thanks to the changes in the schema tree,
 * it is now much more straightforward to get the type of the value and work with the alternative representation of the value
 * fitting better to its type. There is also a new API for the type plugins (see @ref howtoPluginsTypes). Even the base YANG
 * data types are now implemented using this API and can be taken as examples for implementing derived data types.
 *
 * libyang 1.x                  | libyang 2.0                     | Notes
 * :----------------------------|:--------------------------------|:---------------------------------------------------------
 * lyd_new(), lyd_new_output()  | ::lyd_new_inner(), ::lyd_new_list(), ::lyd_new_list2() | Redesigned functionality to better fit new lyd_node structures, creating RPC's output data is now done via a flag parameter of the functions.
 * lyd_new_leaf(), lyd_new_output_leaf() | ::lyd_new_term()       | ^
 * lyd_new_anydata(), lyd_new_output_anydata() | ::lyd_new_any()  | ^
 * lyd_new_yangdata()           | ::lyd_new_ext_inner(), ::lyd_new_ext_list(), ::lyd_new_ext_term(), ::lyd_new_ext_any() | Additional functionality to lyd_new_* functions to cover top-level nodes in extension instances.
 * lyd_insert_attr()            | ::lyd_new_meta()                | Unify naming used in other functions with the similar functionality.
 * -                            | ::lyd_new_attr()                | Added functionality to store the data (temporarily) not connected with schema definitions.
 * -                            | ::lyd_new_attr2()               | ^
 * -                            | ::lyd_new_opaq()                | ^
 * -                            | ::lyd_new_opaq2()               | ^
 * -                            | ::lyd_new_path2()               | Supplement functionality to ::lyd_new_path().
 * -                            | ::lyd_new_ext_path()            | Supplement functionality to ::lyd_new_path() covering data defined in extension instances.
 * lyd_insert()                 | ::lyd_insert_child()            | Renamed to better distinguish from ::lyd_insert_sibling().
 * lyd_change_leaf()            | ::lyd_change_term()             | Align naming with changed names of data structures.
 * -                            | ::lyd_change_meta()             | Transferred functionality of ::lyd_change_term() to metadata.
 * -                            | ::lyd_any_copy_value()          | Added functionality.
 * lyd_free()                   | ::lyd_free_tree()               | Renamed.
 * lyd_free_withsiblings()      | ::lyd_free_all()                | ^
 * -                            | ::lyd_free_siblings()           | Supplement functionality to ::lyd_free_siblings().
 * lyd_free_attr()              | ::lyd_free_attr_single()        | Renamed.
 * -                            | ::lyd_free_attr_siblings()      | Supplement functionality to ::lyd_free_attr_single().
 * -                            | ::lyd_free_meta_single()        | Added functionality.
 * -                            | ::lyd_free_meta_siblings()      | ^
 * lyd_unlink()                 | ::lyd_unlink_tree()             | Renamed.
 *
 *
 * Here is the table of other changes in data API.
 *
 * libyang 1.x                  | libyang 2.0                     | Notes
 * :----------------------------|:--------------------------------|:---------------------------------------------------------
 * lyd_find_instance()          | -                               | Removed.
 * lyd_find_sibling()           | -                               | Removed, functionality can be replaced by ::lyd_find_sibling_val().
 * lyd_find_sibling_set()       | -                               | ^
 * -                            | ::lyd_find_sibling_first()      | Alternative function to ::lyd_find_sibling_val().
 * -                            | ::lyd_find_meta()               | New functionality.
 * lyd_wd_default()             | ::lyd_is_default()              | Renamed to unlink from with-default capability.
 * -                            | ::lyd_parent()                  | New wrapper to get generic ::lyd_node pointer of the parent.
 * -                            | ::lyd_child(), ::lyd_child_no_keys() | New wrapper to cover all children possibilities hidden behind a generic ::lyd_node structure.
 * -                            | ::lyd_owner_module()            | Added functionality.
 * -                            | ::lyd_value_compare()           | Added Functionality.
 * -                            | ::lyd_target()                  | Added functionality for the instance-identifier representation.
 * lyd_node_module()            | -                               | Not necessary since the connection with the compiled modules is much more straightforward.
 * lyd_leaf_type()              | -                               | Not necessary since the real type information is much more clear from the new ::lyd_value.
 * lyd_dec64_to_double()        | -                               | Removed as useless.
 * lyd_node_should_print()      | -                               | ^

 */