diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
index 8b94aa8f5971..2723e6143aa9 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
@@ -144,3 +144,38 @@ gpio21: gpio@21 {
 		bias-pull-up;
 	};
 };
+
+Line naming
+===========
+
+Because several gpio_chip instances are hidden below a single device tree
+node, it is necessary to split the names into several child nodes. Ensure
+that the configured addresses match those in the microchip,spi-present-mask:
+
+gpio@0 {
+	compatible = "microchip,mcp23s17";
+	gpio-controller;
+	#gpio-cells = <2>;
+	/* this bitmask has bits #0 (0x01) and #2 (0x04) set */
+	spi-present-mask = <0x05>;
+	reg = <0>;
+	spi-max-frequency = <1000000>;
+
+	gpio-bank@1 {
+		address = <0>;
+		gpio-line-names =
+			"GPA0",
+			"GPA1",
+			...
+			"GPA7",
+			"GPB0",
+			"GPB1",
+			...
+			"GPB7";
+	};
+
+	gpio-bank@2 {
+		address = <2>;
+		gpio-line-names = ...
+	};
+};
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 80137c1b3cdc..8d1c49a289eb 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1727,11 +1727,6 @@ static inline void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gc)
  */
 int gpiochip_generic_request(struct gpio_chip *gc, unsigned offset)
 {
-#ifdef CONFIG_PINCTRL
-	if (list_empty(&gc->gpiodev->pin_ranges))
-		return 0;
-#endif
-
 	return pinctrl_gpio_request(gc->gpiodev->base + offset);
 }
 EXPORT_SYMBOL_GPL(gpiochip_generic_request);
diff --git a/drivers/hwmon/max31790.c b/drivers/hwmon/max31790.c
index 117fb79ef294..610f62eab72a 100644
--- a/drivers/hwmon/max31790.c
+++ b/drivers/hwmon/max31790.c
@@ -489,11 +489,18 @@ static const struct i2c_device_id max31790_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, max31790_id);
 
+static const struct of_device_id __maybe_unused max31790_of_match[] = {
+	{ .compatible = "maxim,max31790" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max31790_of_match);
+
 static struct i2c_driver max31790_driver = {
 	.class		= I2C_CLASS_HWMON,
 	.probe		= max31790_probe,
 	.driver = {
 		.name	= "max31790",
+		.of_match_table = of_match_ptr(max31790_of_match),
 	},
 	.id_table	= max31790_id,
 };
diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
index 18e06fc6c53f..5c0f429ed7ad 100644
--- a/drivers/hwmon/pmbus/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -361,7 +361,7 @@ enum pmbus_sensor_classes {
 	PSC_NUM_CLASSES		/* Number of power sensor classes */
 };
 
-#define PMBUS_PAGES	32	/* Per PMBus specification */
+#define PMBUS_PAGES	255	/* Per PMBus specification */
 #define PMBUS_PHASES	8	/* Maximum number of phases per page */
 
 /* Functionality bit mask */
diff --git a/drivers/leds/leds-tlc591xx.c b/drivers/leds/leds-tlc591xx.c
index 0929f1275814..710c56cba818 100644
--- a/drivers/leds/leds-tlc591xx.c
+++ b/drivers/leds/leds-tlc591xx.c
@@ -40,6 +40,9 @@
 
 #define ldev_to_led(c)		container_of(c, struct tlc591xx_led, ldev)
 
+#define TLC591XX_RESET_BYTE_0	0xa5
+#define TLC591XX_RESET_BYTE_1	0x5a
+
 struct tlc591xx_led {
 	bool active;
 	unsigned int led_no;
@@ -51,21 +54,25 @@ struct tlc591xx_priv {
 	struct tlc591xx_led leds[TLC591XX_MAX_LEDS];
 	struct regmap *regmap;
 	unsigned int reg_ledout_offset;
+	struct i2c_client *swrst_client;
 };
 
 struct tlc591xx {
 	unsigned int max_leds;
 	unsigned int reg_ledout_offset;
+	u8 swrst_addr;
 };
 
 static const struct tlc591xx tlc59116 = {
 	.max_leds = 16,
 	.reg_ledout_offset = 0x14,
+	.swrst_addr = 0x6b,
 };
 
 static const struct tlc591xx tlc59108 = {
 	.max_leds = 8,
 	.reg_ledout_offset = 0x0c,
+	.swrst_addr = 0x4b,
 };
 
 static int
@@ -181,6 +188,18 @@ tlc591xx_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, priv);
 
+	priv->swrst_client = devm_i2c_new_dummy_device(dev, client->adapter, tlc591xx->swrst_addr);
+	if (IS_ERR(priv->swrst_client)) {
+		dev_info(dev, "Skipping reset: address %02x already used\n",
+				tlc591xx->swrst_addr);
+	} else {
+		err = i2c_smbus_write_byte_data(priv->swrst_client,
+				TLC591XX_RESET_BYTE_0, TLC591XX_RESET_BYTE_1);
+		if (err) {
+			dev_warn(dev, "SW reset failed\n");
+		}
+	}
+
 	err = tlc591xx_set_mode(priv->regmap, MODE2_DIM);
 	if (err < 0)
 		return err;
diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index c39978b750ec..653c0b3d2912 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -960,25 +960,16 @@ static void mvebu_pcie_powerdown(struct mvebu_pcie_port *port)
 }
 
 /*
- * We can't use devm_of_pci_get_host_bridge_resources() because we
- * need to parse our special DT properties encoding the MEM and IO
- * apertures.
+ * devm_of_pci_get_host_bridge_resources() only sets up translateable resources,
+ * so we need extra resource setup parsing our special DT properties encoding
+ * the MEM and IO apertures.
  */
 static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie)
 {
 	struct device *dev = &pcie->pdev->dev;
-	struct device_node *np = dev->of_node;
 	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
 	int ret;
 
-	/* Get the bus range */
-	ret = of_pci_parse_bus_range(np, &pcie->busn);
-	if (ret) {
-		dev_err(dev, "failed to parse bus-range property: %d\n", ret);
-		return ret;
-	}
-	pci_add_resource(&bridge->windows, &pcie->busn);
-
 	/* Get the PCIe memory aperture */
 	mvebu_mbus_get_pcie_mem_aperture(&pcie->mem);
 	if (resource_size(&pcie->mem) == 0) {
@@ -988,6 +979,9 @@ static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie)
 
 	pcie->mem.name = "PCI MEM";
 	pci_add_resource(&bridge->windows, &pcie->mem);
+	ret = devm_request_resource(dev, &iomem_resource, &pcie->mem);
+	if (ret)
+		return ret;
 
 	/* Get the PCIe IO aperture */
 	mvebu_mbus_get_pcie_io_aperture(&pcie->io);
@@ -1001,9 +995,12 @@ static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie)
 		pcie->realio.name = "PCI I/O";
 
 		pci_add_resource(&bridge->windows, &pcie->realio);
+		ret = devm_request_resource(dev, &ioport_resource, &pcie->realio);
+		if (ret)
+			return ret;
 	}
 
-	return devm_request_pci_bus_resources(dev, &bridge->windows);
+	return 0;
 }
 
 /*
diff --git a/drivers/pinctrl/pinctrl-mcp23s08.c b/drivers/pinctrl/pinctrl-mcp23s08.c
index 7edb067f5e76..ce2d8014b7e0 100644
--- a/drivers/pinctrl/pinctrl-mcp23s08.c
+++ b/drivers/pinctrl/pinctrl-mcp23s08.c
@@ -564,7 +564,7 @@ int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
 
 	ret = mcp_read(mcp, MCP_IOCON, &status);
 	if (ret < 0)
-		goto fail;
+		return dev_err_probe(dev, ret, "can't identify chip %d\n", addr);
 
 	mcp->irq_controller =
 		device_property_read_bool(dev, "interrupt-controller");
@@ -598,7 +598,7 @@ int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
 
 		ret = mcp_write(mcp, MCP_IOCON, status);
 		if (ret < 0)
-			goto fail;
+			return dev_err_probe(dev, ret, "can't write IOCON %d\n", addr);
 	}
 
 	if (mcp->irq && mcp->irq_controller) {
@@ -616,7 +616,7 @@ int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
 
 	ret = devm_gpiochip_add_data(dev, &mcp->chip, mcp);
 	if (ret < 0)
-		goto fail;
+		return dev_err_probe(dev, ret, "can't add GPIO chip\n");
 
 	mcp->pinctrl_desc.pctlops = &mcp_pinctrl_ops;
 	mcp->pinctrl_desc.confops = &mcp_pinconf_ops;
@@ -628,18 +628,17 @@ int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
 	mcp->pinctrl_desc.owner = THIS_MODULE;
 
 	mcp->pctldev = devm_pinctrl_register(dev, &mcp->pinctrl_desc, mcp);
-	if (IS_ERR(mcp->pctldev)) {
-		ret = PTR_ERR(mcp->pctldev);
-		goto fail;
-	}
+	if (IS_ERR(mcp->pctldev))
+		return dev_err_probe(dev, PTR_ERR(mcp->pctldev), "can't register controller\n");
 
-	if (mcp->irq)
+	if (mcp->irq) {
 		ret = mcp23s08_irq_setup(mcp);
+		if (ret)
+			return dev_err_probe(dev, ret, "can't setup IRQ\n");
+	}
 
-fail:
-	if (ret < 0)
-		dev_dbg(dev, "can't setup chip %d, --> %d\n", addr, ret);
-	return ret;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(mcp23s08_probe_one);
+
 MODULE_LICENSE("GPL");
diff --git a/drivers/pinctrl/pinctrl-mcp23s08_spi.c b/drivers/pinctrl/pinctrl-mcp23s08_spi.c
index 1f47a661b0a7..3271e304c985 100644
--- a/drivers/pinctrl/pinctrl-mcp23s08_spi.c
+++ b/drivers/pinctrl/pinctrl-mcp23s08_spi.c
@@ -119,13 +119,15 @@ static int mcp23s08_spi_regmap_init(struct mcp23s08 *mcp, struct device *dev,
 		return -EINVAL;
 	}
 
-	copy = devm_kmemdup(dev, &config, sizeof(config), GFP_KERNEL);
+	copy = devm_kmemdup(dev, config, sizeof(*config), GFP_KERNEL);
 	if (!copy)
 		return -ENOMEM;
 
 	copy->name = name;
 
 	mcp->regmap = devm_regmap_init(dev, &mcp23sxx_spi_regmap, mcp, copy);
+	if (IS_ERR(mcp->regmap))
+		dev_err(dev, "regmap init failed for %s\n", mcp->chip.label);
 	return PTR_ERR_OR_ZERO(mcp->regmap);
 }
 
@@ -141,6 +143,7 @@ static int mcp23s08_probe(struct spi_device *spi)
 	int type;
 	int ret;
 	u32 v;
+	struct device_node *np;
 
 	match = device_get_match_data(dev);
 	if (match)
@@ -190,6 +193,16 @@ static int mcp23s08_probe(struct spi_device *spi)
 			return ret;
 
 		ngpio += data->mcp[addr]->chip.ngpio;
+
+		for_each_available_child_of_node(spi->dev.of_node, np) {
+			u32 chip_addr;
+			ret = of_property_read_u32(np, "address", &chip_addr);
+			if (ret)
+				continue;
+			if (chip_addr != addr)
+				continue;
+			devprop_gpiochip_set_names(&data->mcp[addr]->chip, of_fwnode_handle(np));
+		}
 	}
 	data->ngpio = ngpio;
 
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index b57b8b3cc26e..5dc323643522 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -17,8 +17,10 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/of_gpio.h>
 #include <linux/clk.h>
 #include <linux/sizes.h>
+#include <linux/gpio.h>
 #include <asm/unaligned.h>
 
 #define DRIVER_NAME			"orion_spi"
@@ -86,18 +88,15 @@ struct orion_direct_acc {
 	u32			size;
 };
 
-struct orion_child_options {
-	struct orion_direct_acc direct_access;
-};
-
 struct orion_spi {
 	struct spi_master	*master;
 	void __iomem		*base;
 	struct clk              *clk;
 	struct clk              *axi_clk;
 	const struct orion_spi_dev *devdata;
+	int			unused_hw_gpio;
 
-	struct orion_child_options	child[ORION_NUM_CHIPSELECTS];
+	struct orion_direct_acc	direct_access[ORION_NUM_CHIPSELECTS];
 };
 
 static inline void __iomem *spi_reg(struct orion_spi *orion_spi, u32 reg)
@@ -322,27 +321,20 @@ orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 static void orion_spi_set_cs(struct spi_device *spi, bool enable)
 {
 	struct orion_spi *orion_spi;
+	int cs;
 
 	orion_spi = spi_master_get_devdata(spi->master);
 
-	/*
-	 * If this line is using a GPIO to control chip select, this internal
-	 * .set_cs() function will still be called, so we clear any previous
-	 * chip select. The CS we activate will not have any elecrical effect,
-	 * as it is handled by a GPIO, but that doesn't matter. What we need
-	 * is to deassert the old chip select and assert some other chip select.
-	 */
+	if (gpio_is_valid(spi->cs_gpio))
+		cs = orion_spi->unused_hw_gpio;
+	else
+		cs = spi->chip_select;
+
 	orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, ORION_SPI_CS_MASK);
 	orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG,
-			  ORION_SPI_CS(spi->chip_select));
+				ORION_SPI_CS(cs));
 
-	/*
-	 * Chip select logic is inverted from spi_set_cs(). For lines using a
-	 * GPIO to do chip select SPI_CS_HIGH is enforced and inversion happens
-	 * in the GPIO library, but we don't care about that, because in those
-	 * cases we are dealing with an unused native CS anyways so the polarity
-	 * doesn't matter.
-	 */
+	/* Chip select logic is inverted from spi_set_cs */
 	if (!enable)
 		orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
 	else
@@ -434,7 +426,7 @@ orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
 	int cs = spi->chip_select;
 	void __iomem *vaddr;
 
-	word_len = spi->bits_per_word;
+	word_len = xfer->bits_per_word;
 	count = xfer->len;
 
 	orion_spi = spi_master_get_devdata(spi->master);
@@ -443,7 +435,7 @@ orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
 	 * Use SPI direct write mode if base address is available. Otherwise
 	 * fall back to PIO mode for this transfer.
 	 */
-	vaddr = orion_spi->child[cs].direct_access.vaddr;
+	vaddr = orion_spi->direct_access[cs].vaddr;
 
 	if (vaddr && xfer->tx_buf && word_len == 8) {
 		unsigned int cnt = count / 4;
@@ -507,6 +499,9 @@ static int orion_spi_transfer_one(struct spi_master *master,
 
 static int orion_spi_setup(struct spi_device *spi)
 {
+	if (gpio_is_valid(spi->cs_gpio)) {
+		gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
+	}
 	return orion_spi_setup_transfer(spi, NULL);
 }
 
@@ -623,13 +618,13 @@ static int orion_spi_probe(struct platform_device *pdev)
 	master->setup = orion_spi_setup;
 	master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
 	master->auto_runtime_pm = true;
-	master->use_gpio_descriptors = true;
 	master->flags = SPI_MASTER_GPIO_SS;
 
 	platform_set_drvdata(pdev, master);
 
 	spi = spi_master_get_devdata(master);
 	spi->master = master;
+	spi->unused_hw_gpio = -1;
 
 	of_id = of_match_device(orion_spi_of_match_table, &pdev->dev);
 	devdata = (of_id) ? of_id->data : &orion_spi_dev_data;
@@ -682,8 +677,8 @@ static int orion_spi_probe(struct platform_device *pdev)
 	}
 
 	for_each_available_child_of_node(pdev->dev.of_node, np) {
-		struct orion_direct_acc *dir_acc;
 		u32 cs;
+		int cs_gpio;
 
 		/* Get chip-select number from the "reg" property */
 		status = of_property_read_u32(np, "reg", &cs);
@@ -694,6 +689,44 @@ static int orion_spi_probe(struct platform_device *pdev)
 			continue;
 		}
 
+		/*
+		 * Initialize the CS GPIO:
+		 * - properly request the actual GPIO signal
+		 * - de-assert the logical signal so that all GPIO CS lines
+		 *   are inactive when probing for slaves
+		 * - find an unused physical CS which will be driven for any
+		 *   slave which uses a CS GPIO
+		 */
+		cs_gpio = of_get_named_gpio(pdev->dev.of_node, "cs-gpios", cs);
+		if (cs_gpio > 0) {
+			char *gpio_name;
+			int cs_flags;
+
+			if (spi->unused_hw_gpio == -1) {
+				dev_info(&pdev->dev,
+					"Selected unused HW CS#%d for any GPIO CSes\n",
+					cs);
+				spi->unused_hw_gpio = cs;
+			}
+
+			gpio_name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
+					"%s-CS%d", dev_name(&pdev->dev), cs);
+			if (!gpio_name) {
+				status = -ENOMEM;
+				goto out_rel_axi_clk;
+			}
+
+			cs_flags = of_property_read_bool(np, "spi-cs-high") ?
+				GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH;
+			status = devm_gpio_request_one(&pdev->dev, cs_gpio,
+					cs_flags, gpio_name);
+			if (status) {
+				dev_err(&pdev->dev,
+					"Can't request GPIO for CS %d\n", cs);
+				goto out_rel_axi_clk;
+			}
+		}
+
 		/*
 		 * Check if an address is configured for this SPI device. If
 		 * not, the MBus mapping via the 'ranges' property in the 'soc'
@@ -711,13 +744,14 @@ static int orion_spi_probe(struct platform_device *pdev)
 		 * This needs to get extended for the direct SPI NOR / SPI NAND
 		 * support, once this gets implemented.
 		 */
-		dir_acc = &spi->child[cs].direct_access;
-		dir_acc->vaddr = devm_ioremap(&pdev->dev, r->start, PAGE_SIZE);
-		if (!dir_acc->vaddr) {
+		spi->direct_access[cs].vaddr = devm_ioremap(&pdev->dev,
+							    r->start,
+							    PAGE_SIZE);
+		if (!spi->direct_access[cs].vaddr) {
 			status = -ENOMEM;
 			goto out_rel_axi_clk;
 		}
-		dir_acc->size = PAGE_SIZE;
+		spi->direct_access[cs].size = PAGE_SIZE;
 
 		dev_info(&pdev->dev, "CS%d configured for direct access\n", cs);
 	}
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 8434bd5a8ec7..7db66392fcd5 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -235,6 +235,10 @@
 #define MAX310x_REV_MASK		(0xf8)
 #define MAX310X_WRITE_BIT		0x80
 
+/* Timeout for external crystal stability */
+#define MAX310X_XTAL_WAIT_RETRIES	20
+#define MAX310X_XTAL_WAIT_DELAY_MS	10
+
 /* MAX3107 specific */
 #define MAX3107_REV_ID			(0xa0)
 
@@ -610,11 +614,14 @@ static int max310x_set_ref_clk(struct device *dev, struct max310x_port *s,
 
 	/* Wait for crystal */
 	if (xtal) {
-		unsigned int val;
-		msleep(10);
-		regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &val);
+		unsigned int val = 0, i;
+		for (i = 0; i < MAX310X_XTAL_WAIT_RETRIES && !(val & MAX310X_STS_CLKREADY_BIT); ++i) {
+			msleep(MAX310X_XTAL_WAIT_DELAY_MS);
+			regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &val);
+		}
 		if (!(val & MAX310X_STS_CLKREADY_BIT)) {
-			dev_warn(dev, "clock is not stable yet\n");
+			dev_err(dev, "clock is not stable\n");
+			return -EAGAIN;
 		}
 	}
 
@@ -1056,9 +1063,9 @@ static int max310x_startup(struct uart_port *port)
 	max310x_port_update(port, MAX310X_MODE1_REG,
 			    MAX310X_MODE1_TRNSCVCTRL_BIT, 0);
 
-	/* Configure MODE2 register & Reset FIFOs*/
-	val = MAX310X_MODE2_RXEMPTINV_BIT | MAX310X_MODE2_FIFORST_BIT;
-	max310x_port_write(port, MAX310X_MODE2_REG, val);
+	/* Reset FIFOs */
+	max310x_port_write(port, MAX310X_MODE2_REG,
+			   MAX310X_MODE2_FIFORST_BIT);
 	max310x_port_update(port, MAX310X_MODE2_REG,
 			    MAX310X_MODE2_FIFORST_BIT, 0);
 
@@ -1086,8 +1093,27 @@ static int max310x_startup(struct uart_port *port)
 	/* Clear IRQ status register */
 	max310x_port_read(port, MAX310X_IRQSTS_REG);
 
-	/* Enable RX, TX, CTS change interrupts */
-	val = MAX310X_IRQ_RXEMPTY_BIT | MAX310X_IRQ_TXEMPTY_BIT;
+	/*
+	 * Let's ask for an interrupt after a timeout equivalent to
+	 * the receiving time of 4 characters after the last character
+	 * has been received.
+	 */
+	max310x_port_write(port, MAX310X_RXTO_REG, 4);
+
+	/*
+	 * Make sure we also get RX interrupts when the RX FIFO is
+	 * filling up quickly, so get an interrupt when half of the RX
+	 * FIFO has been filled in.
+	 */
+	max310x_port_write(port, MAX310X_FIFOTRIGLVL_REG,
+			   MAX310X_FIFOTRIGLVL_RX(MAX310X_FIFO_SIZE / 2));
+
+	/* Enable RX timeout interrupt in LSR */
+	max310x_port_write(port, MAX310X_LSR_IRQEN_REG,
+			   MAX310X_LSR_RXTO_BIT);
+
+	/* Enable LSR, RX FIFO trigger, CTS change interrupts */
+	val = MAX310X_IRQ_LSR_BIT  | MAX310X_IRQ_RXFIFO_BIT | MAX310X_IRQ_TXEMPTY_BIT;
 	max310x_port_write(port, MAX310X_IRQEN_REG, val | MAX310X_IRQ_CTS_BIT);
 
 	return 0;
@@ -1327,6 +1353,10 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
 	}
 
 	uartclk = max310x_set_ref_clk(dev, s, freq, xtal);
+	if (uartclk < 0) {
+		ret = uartclk;
+		goto out_uart;
+	}
 	dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk);
 
 	for (i = 0; i < devtype->nr; i++) {